In article <kwmOI.4$
[email protected]>,
[email protected]
says...
So Boeing had to scrub launch of its Starliner again due to some faulty valve.
Considering the years of testing and Boeing's experience building "must
work" hardware, how come they had a failed valve? Isn't a valve
something they can test easily and repeatedly to ensure it is reliable?
There are many thrusters on Starliner and therefore many valves. From
an Ars Technica article after the failed OFT-1 flight of Starliner:
Starliner?s thruster performance receiving close scrutiny from NASA
"Many of the elements of the propulsion system were overstressed."
ERIC BERGER - 1/21/2020, 10:55 AM
https://arstechnica.com/science/2020/01/nasa-and-boeing-are-closely- looking-at-starliners-thruster-performance/
The NASA release did not mention thruster performance, but an
agency source told Ars that engineers are looking closely at
the performance of the Starliner propulsion system. In addition
to four large launch abort engines, the service module has 28
reaction control system thrusters, each with 85 pounds of
thrust and 20 more-powerful orbital maneuvering thrusters,
each with 1,500 pounds of thrust.
We'll have to wait to find out exactly what failed. Could be hardware
or software.
Ironic that SpaceX seeks to imitate the routine commercial flights of
Boeing aircraft while Boeing can't imitate itself.
SpaceX launches Falcon9s so often it is hard to keep track. And Boeing
can't seem to be able to launch 1.
To be fair, Boeing doesn't have its own launch vehicles, so you're
comparing apples and oranges.
Jeff
--
All opinions posted by me on Usenet News are mine, and mine alone.
These posts do not reflect the opinions of my family, friends,
employer, or any organization that I am a member of.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)