1. Forum
  2. Usenet
  3. SCI.POLYMERS

  • Bubbles forming during pebax reflow

    From [email protected]@21:1/5 to All on Wed Sep 9 15:56:11 2015
    I realize this was a year ago,but did you guys find a solution to this problem. Im having a similar issue with a 40D pebax resin. thanks

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to [email protected] on Thu Jun 9 16:08:55 2016
    On Wednesday, September 9, 2015 at 3:56:12 PM UTC-7, [email protected] wrote:
    I realize this was a year ago,but did you guys find a solution to this problem. Im having a similar issue with a 40D pebax resin. thanks

    Didn't find a solution sorry. On-going issue.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From ReflowMaster@21:1/5 to All on Wed Feb 8 05:18:02 2017
    replying to aceofclubbs, ReflowMaster wrote:
    Hi all, bubbles are a lot of times fixed with pre-shrinking the FEP before reflowing, also, try increasing time or temperature of reflow oven in 1% rate per try.

    --
    for full context, visit http://www.polytechforum.com/polymers/bubbles-forming-during-pebax-reflow-4218-.htm

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From David Liu@21:1/5 to All on Wed Nov 16 06:31:12 2022
    we have encounter similar problem with PA 12, is any solution to this problem

    --
    For full context, visit https://www.polytechforum.com/polymers/bubbles-forming-during-pebax-reflow-4218-.htm

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)