<
[email protected]> wrote in message news:
[email protected]...
I am simulating the heat transfer for an underground warehouse using 3 different target temperatures. I am using the HETVAL subroutine to account
for the internal heat generation for each target temperature. It works just fine for temperatures above 0 degrees Celsius. However, for negative temperatures I receive a convergence error. The error is: "FIXED TIME
INCREMENT IS TOO LARGE", "NOTE: THE SOLUTION APPEARS TO BE DIVERGING. CONVERGENCE IS JUDGED UNLIKELY".
I would like to simulate the heat flux for a target temperature of -25
degrees Celsius; however HETVAL does not seem to work for the cooling down
of the warehouse.
Any suggestions on how to overcome this problem? Any ideas would be greatly appreciated.
Thanks!
///
From Google:
"User subroutine HETVAL allows you to define a heat flux due to internal
heat generation for heat transfer, ... " I didn't even bother to expand.
HETVAL is for internal heat generation not cooling. To solve the problem
you need another subroutine or another program. When in doubt, read the
manual.
---
news://freenews.netfront.net/ - complaints:
[email protected] ---
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)