On Sun, 16 Mar 2025 20:53:32 +0000, [email protected]d
(Liz Tuddenham) wrote:

Jeroen Belleman <[email protected]> wrote:

On 3/16/25 15:15, john larkin wrote:

https://www.dropbox.com/scl/fi/cd8gxmlrar3kvv3iz36xe/Mu_twin.jpg?rlkey=d >> > vl8e7fbtjnzz3l9q9urkyyfn&raw=1

https://www.dropbox.com/scl/fi/nm1ksdn7eufm90ol0b0ec/Murata_Coupled_1.jp >> > g?rlkey=e7yvk464xupz4axy7lt6zj3zk&raw=1

I was surprised to get K=0.6 by just putting them along side.

That's somewhat surprising, indeed. Are the cores dumbbell-shaped? Does
the coupling vary steeply with the spacing?

The inductors are covered by shrink tubing but seem to be tall skinny
drum cores, dumbbells.

Stick a sig-gen across one and a 'scope across t'other, that will tell
you how much coupling there is at any given spacing.

I've done that but didn't quantify coupling vs distance. I measured
coupling and series inductance assuming two parts mounted as close to
one another as makes sense, not quite mechanically interfering.

I used a third one as a mag field probe, to verify that the series
pair has a magnetic null plane between the parts, and doesn't couple
far-field very much.

The extra 6 mH helps my circuit a bit, without adding ESR. Cute trick.

I guess there could be other uses for this coupling.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)