1. Forum
  2. Usenet
  3. REC.WOODWORKING

  • Re: Motor stalled and won’t start

    From [email protected]@21:1/5 to 1e46773fd804c00b8d5234c0aa3ae6de@ex on Thu Sep 1 05:09:20 2022
    On Thu, 01 Sep 2022 02:45:03 +0000, Ruth <[email protected]> wrote:

    I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250.
    It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled.
    The Instruction book says to hit the red reset button on top of the motor.
    I cannot find a reset button. What shall I do?


    This sketch shows item # 7 as a " protector " and it seems to be
    located in a recess at the back top of the motor ... perhaps
    a flexy-push rubber dust cap over top of the button ?

    https://www.searspartsdirect.com/model/3062ovr0ep-000247/craftsman-113197250-radial-arm-saw-parts

    John T.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to 1e46773fd804c00b8d5234c0aa3ae6de@ex on Thu Sep 1 10:33:36 2022
    On Thu, 01 Sep 2022 02:45:03 +0000, Ruth <[email protected]> wrote:

    I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on top
    of the motor. I cannot find a reset button. What shall I do?

    I don't see a reset button at all. Perhaps there is something in the
    motor itself but it doesn't look like my old one, which did have the
    reset button.

    <https://www.manualslib.com/manual/497496/Craftsman-113-197250.html?page=86#manual>

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to [email protected] on Thu Sep 1 11:49:10 2022
    On Thu, 01 Sep 2022 10:33:36 -0400, [email protected] wrote:

    On Thu, 01 Sep 2022 02:45:03 +0000, Ruth ><[email protected]> wrote:

    I have an old Craftsman 10 inch electronic radial saw. The model number is 113.197250. It is about 40 years old. When I turned it on it started but then it got caught in the kerf and stalled. The Instruction book says to hit the red reset button on
    top of the motor. I cannot find a reset button. What shall I do?

    I don't see a reset button at all. Perhaps there is something in the
    motor itself but it doesn't look like my old one, which did have the
    reset button.

    <https://www.manualslib.com/manual/497496/Craftsman-113-197250.html?page=86#manual>



    Pages 81 - 82 Motor Troubleshooting makes no mention
    of a reset button - so there probably isn't one on your model.
    John T.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)