1. Forum
  2. Usenet
  3. REC.WOODWORKING

  • Re: Is there a Flex Shaft accessory for Standard Routers?

    From Johndonn@21:1/5 to All on Fri Jun 24 03:31:44 2022
    It would however be good if you wanted to create your own dupli carver as you would have no heavy router which needs a hefty counter weight making the whole machine way more versatile as you would not be dealing with the weight of the router

    --
    For full context, visit https://www.homeownershub.com/woodworking/is-there-a-flex-shaft-accessory-for-standard-routers-192934-.htm

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From ck@21:1/5 to All on Fri Jun 24 07:54:51 2022
    Le 24/06/2022 à 05:31, Johndonn a écrit :
    It would however be good if you wanted to create your own dupli carver
    as you would have no heavy router which needs a hefty counter weight
    making the whole machine way more versatile as you would not be dealing
    with the weight of the router



    Try to be more explicit for the intended applications.

    Maybe a linear grinder? (see:https://www.google.com/search?q=linear+grinder&oq=linear+grinde )

    Or a trimmer (e.g. https://www.youtube.com/watch?v=nrS-uIZV9z8)?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From 10x@21:1/5 to All on Fri Jun 24 06:22:00 2022
    On Jun 23, 2022, Johndonn wrote
    (in article<16fb70f985dace6b$98$1937703$[email protected]>):

    It would however be good if you wanted to create your own dupli carver as you would have no heavy router which needs a hefty counter weight making the whole machine way more versatile as you would not be dealing with the weight of the router

    We do realize that this question was originally posted 18 years ago?

    I suspect the original poster has gone on to other endeavors by now.

    Joe
    aka 10x

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From DerbyDad03@21:1/5 to All on Fri Jun 24 12:06:21 2022
    On Friday, June 24, 2022 at 6:22:13 AM UTC-4, 10x wrote:
    On Jun 23, 2022, Johndonn wrote
    (in article<16fb70f985dace6b$98$1937703$[email protected]>):
    It would however be good if you wanted to create your own dupli carver as you
    would have no heavy router which needs a hefty counter weight making the whole machine way more versatile as you would not be dealing with the weight
    of the router
    We do realize that this question was originally posted 18 years ago?

    I suspect the original poster has gone on to other endeavors by now.


    Actually what happened is this:

    The OP rigged up the flexible shaft from his Dremel so that he could use it with
    his 3HP router. Things were going fine until the internal cable bound up, kinking
    the casing and whipping the router up into the air and into the OP's head.

    They say that he is doing OK, considering. He spends his days yelling at re-runs
    of The New Yankee Workshop while the nurses wipe the spittle from his chin.

    He gets especially worked up when Norm opens that drawer full of routers. Something
    about "They are trying to kill you!" but it's kind of hard to understand him.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From 10x@21:1/5 to All on Fri Jun 24 15:29:03 2022
    On Jun 24, 2022, DerbyDad03 wrote
    (in article<[email protected]>):

    We do realize that this question was originally posted 18 years ago?

    I suspect the original poster has gone on to other endeavors by now.

    Actually what happened is this:

    The OP rigged up the flexible shaft from his Dremel so that he could use it with
    his 3HP router. Things were going fine until the internal cable bound up, kinking
    the casing and whipping the router up into the air and into the OP's head.

    They say that he is doing OK, considering. He spends his days yelling at re-runs
    of The New Yankee Workshop while the nurses wipe the spittle from his chin.

    He gets especially worked up when Norm opens that drawer full of routers. Something
    about "They are trying to kill you!" but it's kind of hard to understand him.

    🤪LOL🤪

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to [email protected] on Fri Jun 24 19:46:34 2022
    On Fri, 24 Jun 2022 07:54:51 +0200, ck <[email protected]> wrote:

    Le 24/06/2022 � 05:31, Johndonn a �crit�:
    It would however be good if you wanted to create your own dupli carver
    as you would have no heavy router which needs a hefty counter weight
    making the whole machine way more versatile as you would not be dealing
    with the weight of the router



    Try to be more explicit for the intended applications.

    Maybe a linear grinder? >(see:https://www.google.com/search?q=linear+grinder&oq=linear+grinde )

    Or a trimmer (e.g. https://www.youtube.com/watch?v=nrS-uIZV9z8)?

    A flex shaft turning at 25000RPM? Not this guy, not even eighteen
    years ago.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)