On Saturday, March 2, 2002 at 1:09:21 PM UTC-8, Tim Baker wrote:
Hello,
A couple years ago we purchased a Colorado Infinity Starter. We had
full intentions of eventually buy a complete CTS timing system. But
when it came right down to it, the Daktronics Omnisport 6000 was the
better timing system for our club. W had a lot of good reasons, so I
would prefer this thread not turn into a CTS vs DAK debate.
We were told the CTS starter would trigger the DAK timer. However,
now it seems it does not. We may be forced to buy a new DAK HS200
starter or a rebuilt DAK HS100.
My question is this. I swear I have seen at a meet somewhere a CTS
Infinity connected to a DAK timer. Is there a way to make this work?
Or did I just dream this?
If not, anyone interested in purchasing a slightly used CTS Infinity
Start System?
Thanks in advance.
--
Tim Baker
Belle Vernon Swim Club.
[email protected]
I know this is more than 16 years too late however for CTS Infinity units your best bet is to build or purchase a male 1/4 plug to female plug. Because the Infinity units rely on the quarter inch plugs for starting and Aux speakers its best to have two
built.
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)