1. Forum
  2. Usenet
  3. REC.RADIO.AMATEUR.MISC

  • HTX242

    From Jean Mario Charest@21:1/5 to All on Thu Sep 15 11:42:16 2022
    I have a problem with my HTX242. When I put an RJ45 with a network cable I put my wire for the PTT and when I put it to the ground to activate my PTT and transmit my radio resets and when I remove the wire from the ground the radio returns to the right
    frequency. My two HTX242 do the same thing. But when I put the original microphones they transmit well????

    This problem is weird. I can't put a TNC or a repeater controller. Because when they activate the PTT the radios reset and as soon as the activation of the PTT is finished they return to the established frequency?????

    The PTT is 5Vdc and to ground when it transmit with is mike...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Jean Mario Charest@21:1/5 to All on Thu Sep 15 12:21:06 2022
    Le jeudi 15 septembre 2022 à 14:42:17 UTC-4, Jean Mario Charest a écrit :
    I have a problem with my HTX242. When I put an RJ45 with a network cable I put my wire for the PTT and when I put it to the ground to activate my PTT and transmit my radio resets and when I remove the wire from the ground the radio returns to the right
    frequency. My two HTX242 do the same thing. But when I put the original microphones they transmit well????

    This problem is weird. I can't put a TNC or a repeater controller. Because when they activate the PTT the radios reset and as soon as the activation of the PTT is finished they return to the established frequency?????

    The PTT is 5Vdc and to ground when it transmit with is mike...

    OK I found it. it was a short circuit. Everything is solved...

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Guglielmo Marconi@21:1/5 to Jean Mario Charest on Fri Sep 16 17:07:05 2022
    Jean Mario Charest <[email protected]> wrote in news:[email protected]:

    Guglielmo Marconi <[email protected]> Wrote:

    Le jeudi 15 septembre 2022 � 14:42:17 UTC-4, Jean Mario Charest a
    crit:
    I have a problem with my HTX242. When I put an RJ45 with a network
    cable
    I put my wire for the PTT and when I put it to the ground to
    activatemy PTT and transmit my radio resets and when I remove the wire
    from the ground the radio returns to the right frequency. My two
    HTX242 do the same thing. But when I put the original microphones they
    transmit well????



    You have a short circuit. I would think even a fucking retard
    like you could figure that out.


    OK I found it. it was a short circuit. Everything is solved...


    Glad I could help.
    73

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)