On Tuesday, January 14, 2020 at 9:41:58 AM UTC-8,
[email protected] wrote:
I found out if you take the back cover off and the circuit board off you will see the lcd ribbon.get a pencil with eraser and a hair dryer as you direct the heat onto the ribbon take the eraser and press down on the ribbon board.It was very easy to
take the back off and circuit board off. Total time involved was less then 15 min. After doing this and plugging radio in the lcd was as new with no glitches or missing digits in the lcd display.again it was a quick and easy fix and it worked.also agree
that c crane knew of this issue with lcd display and should of had Sangean fix this problem as this radio is very expensive.
This is also a good point; because the display failure is caused by water vapor, do not locate your radio somewhere high in the kitchen (our C Crane failed atop the refrigerator where it lived). And if you have a failed display, you may be able to
remove just the display and put it into a bed of rice or with silca gel packs for a few days to suck the water vapor out of the display. Good luck!
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)