1. Forum
  2. Usenet
  3. REC.GAMES.PINBALL

  • Bally All Star Bowler reset bank coil latch plate needed

    From pinballtom264@21:1/5 to All on Tue Jun 15 05:33:43 2021
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From pinworks@21:1/5 to All on Thu Jun 17 17:16:32 2021
    On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
    Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
    Pinworks

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From pinballtom264@21:1/5 to [email protected] on Tue Jun 22 06:56:51 2021
    On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, [email protected] wrote:
    On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
    Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
    Pinworks
    Thanks for the response turns out PBR had some under a different part # that work perfect.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From pinworks@21:1/5 to All on Wed Jun 30 08:08:43 2021
    On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:
    On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, [email protected] wrote:
    On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
    Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
    Pinworks
    Thanks for the response turns out PBR had some under a different part # that work perfect.
    Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

    Thank you

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From pinballtom264@21:1/5 to [email protected] on Wed Jun 30 12:10:31 2021
    On Wednesday, June 30, 2021 at 11:08:49 AM UTC-4, [email protected] wrote:
    On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:
    On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, [email protected] wrote:
    On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
    Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
    Pinworks
    Thanks for the response turns out PBR had some under a different part # that work perfect.
    Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

    Thank you
    A-261-5

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From John Robertson@21:1/5 to All on Wed Jun 30 13:34:27 2021
    On 2021/06/30 12:10 p.m., pinballtom264 wrote:
    On Wednesday, June 30, 2021 at 11:08:49 AM UTC-4, [email protected] wrote:
    On Tuesday, June 22, 2021 at 9:56:57 AM UTC-4, pinballtom264 wrote:
    On Thursday, June 17, 2021 at 8:16:38 PM UTC-4, [email protected] wrote:
    On Tuesday, June 15, 2021 at 8:33:50 AM UTC-4, pinballtom264 wrote:
    I have a couple of broken latch plates on my reset bank causing some pins to lift immediately on reset, I don't have a part # (manual on order) has anyone dealt with this and knows a part number or possibly has some spares?
    Can you post a picture of a good one? I have some latch plates from pinball machines, but I don't know if they would fit. I worked on a manniken bowler a few years ago and it was definitely different from pinball.
    Pinworks
    Thanks for the response turns out PBR had some under a different part # that work perfect.
    Please send me the part number. I have a long standing issue with a broken reset plate on a mannikin ball bowler that these may apply to.

    Thank you
    A-261-5


    Anything like these A-261-15s?

    https://flippers.com/catalog_oc/armature-p-3763.html?search=261-5

    John :-#)#

    --
    (Please post followups or tech inquiries to the USENET newsgroup)
    John's Jukes Ltd.
    MOVED to #7 - 3979 Marine Way, Burnaby, BC, Canada V5J 5E3
    (604)872-5757 (Pinballs, Jukes, Video Games)
    www.flippers.com
    "Old pinballers never die, they just flip out."

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)