1. Forum
  2. Usenet
  3. REC.GAMES.PINBALL

  • Re: Bally King Tut--Solution for Broken Clutch?

    From Thomas Fredericaa@21:1/5 to High Noon on Mon Jun 12 20:28:16 2023
    On Tuesday, February 5, 2013 at 2:31:57 PM UTC-6, High Noon wrote:
    I have a Bally On Beam. I have it on my todo list to draft up a 3D model of the clutch on the trip relay assembly and then have reproductions made. I planned on either sharing the 3D model so that people can have their own 3D printed or I could have
    some made and send them to people. Is this something you'd be interested in?

    --Luke

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Sean Westmueller@21:1/5 to High Noon on Mon Jun 12 20:29:45 2023
    On Tuesday, February 5, 2013 at 2:31:57 PM UTC-6, High Noon wrote:
    I have a Bally On Beam. I have it on my todo list to draft up a 3D model of the clutch on the trip relay assembly and then have reproductions made. I planned on either sharing the 3D model so that people can have their own 3D printed or I could have
    some made and send them to people. Is this something you'd be interested in?

    --Luke

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Sean Westmueller@21:1/5 to High Noon on Mon Jun 12 20:30:51 2023
    On Tuesday, February 5, 2013 at 2:31:57 PM UTC-6, High Noon wrote:
    I have a Bally On Beam. I have it on my todo list to draft up a 3D model of the clutch on the trip relay assembly and then have reproductions made. I planned on either sharing the 3D model so that people can have their own 3D printed or I could have
    some made and send them to people. Is this something you'd be interested in?

    --Luke


    Hey Luke I realize that this is 10 years old. Did you ever put together a 3 d model of the clutch?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Mark@21:1/5 to Sean Westmueller on Tue Jun 20 21:19:57 2023
    On 6/12/23 21:30, Sean Westmueller wrote:
    On Tuesday, February 5, 2013 at 2:31:57 PM UTC-6, High Noon wrote:
    I have a Bally On Beam. I have it on my todo list to draft up a 3D model of the clutch on the trip relay assembly and then have reproductions made. I planned on either sharing the 3D model so that people can have their own 3D printed or I could have
    some made and send them to people. Is this something you'd be interested in?

    --Luke


    Hey Luke I realize that this is 10 years old. Did you ever put together a 3 d model of the clutch?

    Have a look at: https://pinside.com/pinball/forum/topic/bally-reset-bank-clutch-fix/page/2#post-7627161

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)