On Tuesday, December 7, 2010 at 1:40:28 AM UTC-5, Lloyd Olson wrote:
Corvette is not a Stern pin. And Corvette has no shaker motor. Or wiring
for it, or programming to support it. LTG :)
"Mick406" <[email protected]> wrote in message news:[email protected]...
I know very little about repairing pins but that pin is a Stern
product, and I bought a new Shaker Motor Kit for my Stern machine
(Avatar). I actually installed it myself! It was not all that
difficult. I THINK, if I had the money, I would just buy a new one
and go from there, unless you are good at tracing wiring and such. I
got mine from Bay Area Amusements for about $179.00 I believe. I have
seen them on eBay for $165,00.
This would be how I would try to solve this problem. You and others
may know a much better answer.
Mike
Lloyd, before you reply please do your research. Corvette Pinball Machines are indeed capable of adding a shaker motor. You can get one that is compatible from
http://www.pinshakers.com/ or
https://www.pinsound.org/support/motion-control-standalone-
edition-help/
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)