I'm nearing completion on this project , not a lot left now . All
that's left is the nut to hold the sleeve in the bottom plate and the
one for tightening the collet , plus I still need to drill/mill the
index dimples in the collet holder .
That completes the fixture , then I need to machine a means to hold
the grinding wheel . Could go with a dedicated mandrel , could machine washers/plates to use one of the mandrels I already have .
--
Snag
"You can lead a dummy to facts
but you can't make him think."

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 3/10/2023 8:26 PM, Jim Wilkins wrote:

"Snag"  wrote in message news:tugb5g$253gi$[email protected]...

  I'm nearing completion on this project , not a lot left now . All
that's left is the nut to hold the sleeve in the bottom plate and the
one for tightening the collet , plus I still need to drill/mill the
index dimples in the collet holder .
  That completes the fixture , then I need to machine a means to hold
the grinding wheel . Could go with a dedicated mandrel , could machine washers/plates to use one of the mandrels I already have .
Snag
"You can lead a dummy to facts
but you can't make him think."

------------------------

The collet tightening nut on my commercial fixture has a hex hole for an Allen wrench. The collet nut I made which accepts an insert to center an
S&D drill bit shank has four radial slots that fit a dog-type wrench, as
that was simpler to machine, although I have cut internal hexes by using
a lathe as a shaper. The wrench handle is a V of 3/16" welding rod with
the ends bent inward to fit holes in the OD of the wrench.

Since it's small I made it look nice to add to the samples I took to job interviews. At lunch today I was chatting with a retired HR manager and showed her some. She agreed that they were more convincing than anything
I could write on a resume, since they were physical proof instead of questionable claims. Similar goodies got me into Segway.

1-1/4" is a common center hole size for surface and tool grinding wheels.

The wheel I selected is a 6" meant for grinding carbide saw blade
teeth ... and it has the 1 1/4" hole . The most rigid mandrel I have is
the one that came with my lathe with a 1/8" slitting blade on it . I
don't think the loads are going to be all that great ... but since I've
got lots of stock and plenty of time I'll probably make a dedicated
mandrel for this task . Short and stubby and very very rigid .
--
Snag
"You can lead a dummy to facts
but you can't make him think."

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

"Snag" wrote in message news:tugb5g$253gi$[email protected]...

I'm nearing completion on this project , not a lot left now . All
that's left is the nut to hold the sleeve in the bottom plate and the
one for tightening the collet , plus I still need to drill/mill the
index dimples in the collet holder .
That completes the fixture , then I need to machine a means to hold
the grinding wheel . Could go with a dedicated mandrel , could machine washers/plates to use one of the mandrels I already have .
Snag
"You can lead a dummy to facts
but you can't make him think."

------------------------

The collet tightening nut on my commercial fixture has a hex hole for an
Allen wrench. The collet nut I made which accepts an insert to center an S&D drill bit shank has four radial slots that fit a dog-type wrench, as that
was simpler to machine, although I have cut internal hexes by using a lathe
as a shaper. The wrench handle is a V of 3/16" welding rod with the ends
bent inward to fit holes in the OD of the wrench.

Since it's small I made it look nice to add to the samples I took to job interviews. At lunch today I was chatting with a retired HR manager and
showed her some. She agreed that they were more convincing than anything I could write on a resume, since they were physical proof instead of
questionable claims. Similar goodies got me into Segway.

1-1/4" is a common center hole size for surface and tool grinding wheels.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)