Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On Monday, September 5, 2022 at 3:37:40 PM UTC-7, Robert Walpole wrote:

Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

You'll probably find more info over here https://www.practicalmachinist.com/forum/categories/antique-machinery-and-history.19/ this forum is real active .
http://www.vintagemachinery.org/mfgIndex/detail.aspx?id=2756 http://www.lathes.co.uk/dalton/index.html
good luck
animal

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 9/5/2022 6:37 PM, Robert Walpole wrote:

Hi, is this group still active? I have recently been given a Dalton Lathe and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

Not very much going on here. Years ago ...

My favorite: https://bbs.homeshopmachinist.net/forum/general

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

"Bob Engelhardt" wrote in message news:RXHRK.110113$[email protected]...

On 9/5/2022 6:37 PM, Robert Walpole wrote:

Hi, is this group still active? I have recently been given a Dalton Lathe
and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

Not very much going on here. Years ago ...

My favorite: https://bbs.homeshopmachinist.net/forum/general

---------------

The South Bend Lathe book "How to Run a Lathe" Is a good operator's manual
for older (and modern hobby) machines. http://www.vintagemachinery.org/pubs/1617/3789.pdf

Although it's from 1914, almost everything in it is still valid for today's manual lathe work. Newer editions leave out things that might apply to your
old Dalton. Allen wrenches can be ground to imitate forged cutting tools to
get yourself started.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

wrote in message
news:[email protected]...

On Monday, September 5, 2022 at 3:37:40 PM UTC-7, Robert Walpole wrote:

Hi, is this group still active? I have recently been given a Dalton Lathe
and would like to learn more about them.

Hope to hear from someone,

Rob in NC.

You'll probably find more info over here https://www.practicalmachinist.com/forum/categories/antique-machinery-and-history.19/
this forum is real active . http://www.vintagemachinery.org/mfgIndex/detail.aspx?id=2756 http://www.lathes.co.uk/dalton/index.html
good luck
animal

-----------------------

The photos of the 'Dalton Lot 6 - as new' show many details that are very similar to my 1965 South Bend, such as the ball-closed oilers and the forward/reverse threading mechanism (tumbler) which SB calls a recent improvement in 1914. I even have a diamond-knurled Jacobs chuck.

The spout on an Eagle model 66 brass oil can matches those oil fittings, and opens the spring cap on Gits oil cups. Since I have one (bought new) I
haven't looked for current production oilers that also fit.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)