I made these rings yesterday. I have excess CA glue on the core but I
was afraid to use CA removal fluid to remove the CA. I thought the
removal liquid is so flowing that it might compromise the CA holding the
wood to the core. What do you think?
From the left or bottom is poplar wood (with CA finish), middle is lignum vitae (no finish) and top or right is bloodwood (CA finish).
https://www.dropbox.com/s/n0gkkj06xhk8ece/Rings%20bloodwood%20lignum%20vitae%20poplar1.JPG?dl=0
https://www.dropbox.com/s/a3z5so20ounamkj/Rings%20bloodwood%20lignum%20vitae%20poplar.JPG?dl=0
Dave Leader <[email protected]> wrote:
I made these rings yesterday. I have excess CA glue on the core but I
was afraid to use CA removal fluid to remove the CA. I thought the
removal liquid is so flowing that it might compromise the CA holding the wood to the core. What do you think?
From the left or bottom is poplar wood (with CA finish), middle is lignum vitae (no finish) and top or right is bloodwood (CA finish).
https://www.dropbox.com/s/n0gkkj06xhk8ece/Rings%20bloodwood%20lignum%20vitae%20poplar1.JPG?dl=0
https://www.dropbox.com/s/a3z5so20ounamkj/Rings%20bloodwood%20lignum%20vitae%20poplar.JPG?dl=0
Very nice.
I would try the removal fluid applied with a paper towel so as to not
flood the joint area.
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 715 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 07:44:49 |
| Calls: | 12,100 |
| Files: | 15,003 |
| Messages: | 6,517,935 |
