If you need o-rings for DOT3/DOT4 you should use these made from EPDM rubber:
https://powerrubber.com/en/rubber-compounds/rubber-epdm/ . It is the best soultion.
If you need o-rings for DOT5 you should use these made from VMQ rubber:
https://powerrubber.com/en/rubber-compounds/silicone-rubber-mvq/
piątek, 9 stycznia 2015 o 18:41:56 UTC+1 bumper napisał(a):
On Thursday, January 8, 2015 at 12:52:00 PM UTC-8, [email protected] wrote:
I also anodized my Cleveland 30-9 brake caliper.
With mixed success.
See my project at
3U,
Nice work!
For the pucks, simple to make new ones on a lathe.
I know one gentleman who filled the caliper bore pits with JB Weld, then sanded smooth. It worked, at least initially. I moved from that airport so don't know long term efficacy - I imagine little bits of JB Weld would come loose and fowl the works.
bumper
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)