1. Forum
  2. Usenet
  3. REC.AUTOS.ROD-N-CUSTOM

  • 350 chevy crate motor rocker arm nut torque?

    From [email protected]@21:1/5 to All on Sat Apr 23 06:36:42 2016
    It is a 72chevy 350

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Terminal Crazy@21:1/5 to [email protected] on Sat Apr 23 19:21:44 2016
    In article <[email protected]>,
    <[email protected]> wrote:
    It is a 72chevy 350
    Doesn't matter. Read up on what you're trying to do.

    You set the Valve lash by adjusting the nut.
    They don't torque up as such, like the ford cleveland Non adjustable
    fulcrum rockers.

    Mitch

    --
    Terminal_Crazy

    Mitch - 1995 Z28 LT1 M6 [email protected] Lancashire England http://www.sand-hill.freeserve.co.uk/terminal_crazy/

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to All on Sun Jan 8 22:57:02 2017
    Tighten till theres no up\dwn play in rods. Then crank it with head covers off. Then tighten till tap is gone. Plus quarter to full turn. Dnt makr it more difficult then it needs to be guys.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to All on Fri May 8 15:14:31 2020
    Mine is an 88 corvette

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to All on Fri May 8 15:12:39 2020
    What about an 88 corvette?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)