1. Forum
  2. Usenet
  3. REC.AUDIO.PRO

  • Oktava MC012 Foam Damage

    From Angus Kerr@21:1/5 to All on Fri May 13 04:57:27 2022
    Hi there

    Long time no post :( something like 7 years!

    Anyhow, after a long hiatus, my home studio is back up and running since the new generation of my family have found music...

    I opened up my Oktava MC012's - 1 body, 3 capsules, a metal mount and a -10db pad in a plastic case, and to my horror, not only has the foam deteriorated to a sticky mucky mess, but it has adhered to the paintwork of the microphones and reacted with it
    to cause pitting to the satin nickel finish.

    Any idea if I can remove the muck? mics still work OK but they look awful...

    Thanks
    Angus

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Scott Dorsey@21:1/5 to [email protected] on Fri May 13 23:01:54 2022
    Angus Kerr <[email protected]> wrote:
    Anyhow, after a long hiatus, my home studio is back up and running since th= >e new generation of my family have found music...

    I opened up my Oktava MC012's - 1 body, 3 capsules, a metal mount and a -10= >db pad in a plastic case, and to my horror, not only has the foam deteriora= >ted to a sticky mucky mess, but it has adhered to the paintwork of the micr= >ophones and reacted with it to cause pitting to the satin nickel finish.

    This is the same urethane breakdown process that causes sticky shed on tapes and speaker surrounds to fall apart!

    Rubbing alcohol should remove it although you'll still have that finish pitting underneath. If alcohol doesn't do it, try naptha. Don't get it into the vents!
    --scott

    --
    "C'est un Nagra. C'est suisse, et tres, tres precis."

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From [email protected]@21:1/5 to Scott Dorsey on Sat May 14 00:24:03 2022
    Scott Dorsey wrote:
    ================

    This is the same urethane breakdown process that causes sticky shed on tapes and speaker surrounds to fall apart!


    ** Plus the fine, coil springs of reverb tanks.
    Certain Accutronics models have a foam pad that damps coil impact with the floating tray.
    It rots and coats the 4 or 6 springs in tiny particles of goop.
    Net result is next to no reverb.


    Rubbing alcohol should remove it although you'll still have that finish pitting
    underneath. If alcohol doesn't do it, try naptha.

    ** Yep, naptha or else acetone is the cure.

    Damn hard to successfully apply all along and inside a long coil spring.


    .... Phil

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Angus Kerr@21:1/5 to Scott Dorsey on Wed Jun 1 04:43:20 2022
    On Saturday, May 14, 2022 at 1:02:00 AM UTC+2, Scott Dorsey wrote:
    Angus Kerr <[email protected]> wrote:
    Anyhow, after a long hiatus, my home studio is back up and running since th= >e new generation of my family have found music...

    I opened up my Oktava MC012's - 1 body, 3 capsules, a metal mount and a -10= >db pad in a plastic case, and to my horror, not only has the foam deteriora= >ted to a sticky mucky mess, but it has adhered to the paintwork of the micr= >ophones and reacted with it to cause pitting to the satin nickel finish. This is the same urethane breakdown process that causes sticky shed on tapes and speaker surrounds to fall apart!

    Rubbing alcohol should remove it although you'll still have that finish pitting
    underneath. If alcohol doesn't do it, try naptha. Don't get it into the vents!
    --scott

    --
    "C'est un Nagra. C'est suisse, et tres, tres precis."

    Thanks Scott

    I've got most of it off with Isopropyl alcohol, but the sticky much is awful. Not only does it stick, but it also seems to react with the paint... Unfortunately, the pitting is permanent, and some of the screenprinting (i.e. the polar pattern marking) also gets messed up by the muck.

    It really is a pity..
    Surprisingly, the mics work fine (mostly - one dead hypercardioid capsule)

    Question is though, what can I use to replace the foam (that will not turn to glue)?

    Felt?

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)