XPost: linux.debian.bugs.dist
From: [email protected]

Package: src:linux
Version: 6.1.135-1
Severity: normal




-- Package-specific info:
** Version:
Linux version 6.1.0-34-amd64 ([email protected]) (gcc-12 (Debian 12.2.0-14+deb12u1) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.135-1 (2025-04-25)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-6.1.0-34-amd64 root=UUID=f1c6ea5a-fb4f-47e3-846a-788bb9677f60 ro quiet

** Tainted: POE (12289)
* proprietary module was loaded
* externally-built ("out-of-tree") module was loaded
* unsigned module was loaded

** Kernel log:
[21731.953519] ACPI: \_SB_.PLTF.C004: Found 3 idle states
[21731.953828] CPU2 is up
[21731.953858] smpboot: Booting Node 0 Processor 3 APIC 0x6
[21731.953970] microcode: CPU3: patch_level=0x0a708007
[21731.956210] ACPI: \_SB_.PLTF.C006: Found 3 idle states
[21731.956559] CPU3 is up
[21731.956573] smpboot: Booting Node 0 Processor 4 APIC 0x8
[21731.956692] microcode: CPU4: patch_level=0x0a708007
[21731.959056] ACPI: \_SB_.PLTF.C008: Found 3 idle states
[21731.959351] CPU4 is up
[21731.959365] smpboot: Booting Node 0 Processor 5 APIC 0xa
[21731.959485] microcode: CPU5: patch_level=0x0a708007
[21731.961731] ACPI: \_SB_.PLTF.C00A: Found 3 idle states
[21731.962149] CPU5 is up
[21731.962163] smpboot: Booting Node 0 Processor 6 APIC 0x1
[21731.962416] microcode: CPU6: patch_level=0x0a708007
[21731.964631] ACPI: \_SB_.PLTF.C001: Found 3 idle states
[21731.965050] Spectre V2 : Update user space SMT mitigation: STIBP always-on [21731.965053] CPU6 is up
[21731.965084] smpboot: Booting Node 0 Processor 7 APIC 0x3
[21731.965339] microcode: CPU7: patch_level=0x0a708007
[21731.967392] Spurious APIC interrupt (vector 0xFF) on CPU#7, should never happen.
[21731.967616] ACPI: \_SB_.PLTF.C003: Found 3 idle states
[21731.968188] CPU7 is up
[21731.968203] smpboot: Booting Node 0 Processor 8 APIC 0x5
[21731.968323] microcode: CPU8: patch_level=0x0a708007
[21731.970347] Spurious APIC interrupt (vector 0xFF) on CPU#8, should never happen.
[21731.970566] ACPI: \_SB_.PLTF.C005: Found 3 idle states
[21731.971206] CPU8 is up
[21731.971224] smpboot: Booting Node 0 Processor 9 APIC 0x7
[21731.971347] microcode: CPU9: patch_level=0x0a708007
[21731.973374] Spurious APIC interrupt (vector 0xFF) on CPU#9, should never happen.
[21731.973600] ACPI: \_SB_.PLTF.C007: Found 3 idle states
[21731.974320] CPU9 is up
[21731.974336] smpboot: Booting Node 0 Processor 10 APIC 0x9
[21731.974471] microcode: CPU10: patch_level=0x0a708007
[21731.976498] Spurious APIC interrupt (vector 0xFF) on CPU#10, should never happen.
[21731.976707] ACPI: \_SB_.PLTF.C009: Found 3 idle states
[21731.977441] CPU10 is up
[21731.977490] smpboot: Booting Node 0 Processor 11 APIC 0xb
[21731.977656] microcode: CPU11: patch_level=0x0a708007
[21731.979683] Spurious APIC interrupt (vector 0xFF) on CPU#11, should never happen.
[21731.979930] ACPI: \_SB_.PLTF.C00B: Found 3 idle states
[21731.980902] CPU11 is up
[21731.982693] ACPI: PM: Waking up from system sleep state S3
[21732.278587] xhci_hcd 0000:0d:00.0: xHC error in resume, USBSTS 0x401, Reinit [21732.278593] usb usb1: root hub lost power or was reset
[21732.278594] usb usb2: root hub lost power or was reset
[21732.312119] nvme nvme0: 12/0/0 default/read/poll queues
[21732.485752] r8169 0000:05:00.0 enp5s0: Link is Down
[21732.801266] ata2: SATA link down (SStatus 0 SControl 300)
[21732.801297] ata1: SATA link down (SStatus 0 SControl 300)
[21732.845738] usb 1-10: reset full-speed USB device number 4 using xhci_hcd [21732.961676] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [21733.015584] ata3.00: configured for UDMA/133
[21733.341747] usb 1-7: reset full-speed USB device number 3 using xhci_hcd [21733.833761] usb 1-2: reset high-speed USB device number 2 using xhci_hcd [21734.253775] usb 1-11: reset high-speed USB device number 5 using xhci_hcd [21734.677787] usb 1-12: reset high-speed USB device number 6 using xhci_hcd [21734.817741] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [21734.817752] ata4.00: Entering active power mode
[21734.843762] ata4.00: configured for UDMA/133
[21735.001732] usb 1-11.3: reset full-speed USB device number 7 using xhci_hcd [21735.369445] snd_hda_intel 0000:04:00.0: firmware: failed to load ctefx-desktop.bin (-2)
[21735.369460] snd_hda_intel 0000:04:00.0: firmware: failed to load ctefx-desktop.bin (-2)
[21735.369462] snd_hda_intel 0000:04:00.0: Direct firmware load for ctefx-desktop.bin failed with error -2
[21735.437775] usb 1-12.1: reset high-speed USB device number 8 using xhci_hcd [21735.637778] usb 1-12.4: reset full-speed USB device number 10 using xhci_hcd [21735.714475] r8169 0000:05:00.0 enp5s0: Link is Up - 1Gbps/Full - flow control off
[21735.757857] usb 1-12.4: device descriptor read/64, error -32
[21735.967087] snd_hda_codec_ca0132 hdaudioC2D1: ca0132 DSP downloaded and running
[21736.133820] usb 1-12.1.2: reset full-speed USB device number 11 using xhci_hcd
[21736.393774] usb 1-12.1.3: reset high-speed USB device number 13 using xhci_hcd
[21736.593850] usb 1-11.4: reset high-speed USB device number 16 using xhci_hcd [21736.957838] usb 1-11.4.2: reset high-speed USB device number 17 using xhci_hcd
[21737.186137] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[21737.186540] OOM killer enabled.
[21737.186542] Restarting tasks ...
[21737.191364] Bluetooth: hci1: RTL: examining hci_ver=0c hci_rev=000b lmp_ver=0c lmp_subver=8851
[21737.191400] Bluetooth: hci0: RTL: rom_version status=0 version=1 [21737.191404] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin [21737.191488] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8761bu_fw.bin
[21737.191513] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin [21737.191533] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8761bu_config.bin
[21737.191550] Bluetooth: hci0: RTL: cfg_sz 6, total sz 27814

[continued in next message]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)