XPost: linux.debian.user

--2312926965d1418f9bf2c14cfccf41f4
Content-Type: text/plain

I'm experimenting with installing Bullseye on a Cubox-i4Pro I keep around for testing purposes.

I followed the instructions at:
http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images

Then I dd'ed the resulting complete image onto an 8GB microSD card, which I then inserted into the microSD slot in the Cubox-I. When I applied power, I got the attached log on the serial console.

Does anyone know what I'm doing wrong? Is this a bug in the installer? If so, what's the best way for me to volunteer to help as a tester in debugging it.

Rick
--2312926965d1418f9bf2c14cfccf41f4
Content-Disposition: attachment;filename="screenlog"
Content-Type: application/octet-stream; name="screenlog" Content-Transfer-Encoding: BASE64

VS1Cb290IFNQTCAyMDIyLjA0K2Rmc2ctMitiMSAoTWF5IDE0IDIwMjIgLSAyMToyNToyNSAr MDAwMCkNClRyeWluZyB0byBib290IGZyb20gTU1DMQ0KDQoNClUtQm9vdCAyMDIyLjA0K2Rm c2ctMitiMSAoTWF5IDE0IDIwMjIgLSAyMToyNToyNSArMDAwMCkNCg0KQ1BVOiAgIEZyZWVz Y2FsZSBpLk1YNlEgcmV2MS4zIDk5NiBNSHogKHJ1bm5pbmcgYXQgNzkyIE1IeikNCkNQVTog ICBFeHRlbmRlZCBDb21tZXJjaWFsIHRlbXBlcmF0dXJlIGdyYWRlICgtMjBDIHRvIDEwNUMp IGF0IDMzQw0KUmVzZXQgY2F1c2U6IFBPUg0KQm9hcmQ6IE1YNiBDdWJveC1pDQpEUkFNOiAg MiBHaUINCkNvcmU6ICA3MSBkZXZpY2VzLCAxMyB1Y2xhc3NlcywgZGV2aWNldHJlZTogZml0 DQpNTUM6ICAgRlNMX1NESEM6IDEsIEZTTF9TREhDOiAyDQpMb2FkaW5nIEVudmlyb25tZW50 IGZyb20gTU1DLi4uICoqKiBXYXJuaW5nIC0gYmFkIENSQywgdXNpbmcgZGVmYXVsdCBlbnZp cm9ubWVudA0KDQpJbjogICAgc2VyaWFsDQpPdXQ6ICAgc2VyaWFsDQpFcnI6ICAgc2VyaWFs DQpOZXQ6ICAgZXRoMDogZXRoZXJuZXRAMjE4ODAwMA0KSGl0IGFueSBrZXkgdG8gc3RvcCBh dXRvYm9vdDogIDIgCAgIIDEgCAgIIDAgDQpzd2l0Y2ggdG8gcGFydGl0aW9ucyAjMCwgT0sN Cm1tYzEgaXMgY3VycmVudCBkZXZpY2UNCkNhcmQgZGlkIG5vdCByZXNwb25kIHRvIHZvbHRh Z2Ugc2VsZWN0ISA6IC0xMTANCkNBQ0hFOiBNaXNhbGlnbmVkIG9wZXJhdGlvbiBhdCByYW5n ZSBbZTU5ZmYwMWMsIGU1OWZmOTFjXQ0KdGltZW91dCBleGl0IQ0KQ0FDSEU6IE1pc2FsaWdu ZWQgb3BlcmF0aW9uIGF0IHJhbmdlIFtlNTlmZjAxYywgZTU5ZmY5MWNdDQp0aW1lb3V0IGV4 aXQhDQpTQVRBIERldmljZSBJbmZvOg0KDVMvTjogDQpxjv3xHI5Y8OSOWA0KDVByb2R1Y3Qg bW9kZWwgbnVtYmVyOiANCg1GaXJtd2FyZSB2ZXJzaW9uOiCO/g0KDUNhcGFjaXR5OiAyOTk0 IHNlY3RvcnMNCg0NCkRldmljZSAwOiBzdGFydGluZyBVU0IuLi4NCkJ1cyB1c2JAMjE4NDAw MDogVVNCIEVIQ0kgMS4wMA0KQnVzIHVzYkAyMTg0MjAwOiBVU0IgRUhDSSAxLjAwDQpzY2Fu bmluZyBidXMgdXNiQDIxODQwMDAgZm9yIGRldmljZXMuLi4gMSBVU0IgRGV2aWNlKHMpIGZv dW5kDQpzY2FubmluZyBidXMgdXNiQDIxODQyMDAgZm9yIGRldmljZXMuLi4gMSBVU0IgRGV2 aWNlKHMpIGZvdW5kDQogICAgICAgc2Nhbm5pbmcgdXNiIGZvciBzdG9yYWdlIGRldmljZXMu Li4gMCBTdG9yYWdlIERldmljZShzKSBmb3VuZA0KDQpEZXZpY2UgMDogdW5rbm93biBkZXZp Y2UNCkJPT1RQIGJyb2FkY2FzdCAxDQpESENQIGNsaWVudCBib3VuZCB0byBhZGRyZXNzIDE5 Mi4xNjguMy4xMjkgKDcgbXMpDQoqKiogV2FybmluZzogbm8gYm9vdCBmaWxlIG5hbWU7IHVz aW5nICdDMEE4MDM4MS5pbWcnDQpVc2luZyBldGhlcm5ldEAyMTg4MDAwIGRldmljZQ0KVEZU UCBmcm9tIHNlcnZlciAxOTIuMTY4LjEuMTQ7IG91ciBJUCBhZGRyZXNzIGlzIDE5Mi4xNjgu My4xMjkNCkZpbGVuYW1lICdDMEE4MDM4MS5pbWcnLg0KTG9hZCBhZGRyZXNzOiAweDEyMDAw MDAwDQpMb2FkaW5nOiAqCFQgVCBUIFQgVCBUIAo=

--2312926965d1418f9bf2c14cfccf41f4--

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: linux.debian.user

On Sun, Jul 17, 2022, at 6:37 PM, Rick Thomas wrote:

I'm experimenting with installing Bullseye on a Cubox-i4Pro I keep
around for testing purposes.

I followed the instructions at:

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images

Then I dd'ed the resulting complete image onto an 8GB microSD card,
which I then inserted into the microSD slot in the Cubox-I. When I
applied power, I got the attached log on the serial console.

Does anyone know what I'm doing wrong? Is this a bug in the installer?
If so, what's the best way for me to volunteer to help as a tester in debugging it.

Rick
Attachments:
* screenlog

In case it helps, the two components I used in this experiment are:

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/firmware.MX6_Cubox-i.img.gz

and

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/partition.img.gz

On the web page, these files are dated 2022-07-05 15:57 .

Any clues are appreciated!
Rick

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: linux.debian.user

On 2022-07-17, Rick Thomas wrote:

I'm experimenting with installing Bullseye on a Cubox-i4Pro I keep around for testing purposes.

I followed the instructions at:
http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images

Then I dd'ed the resulting complete image onto an 8GB microSD card,
which I then inserted into the microSD slot in the Cubox-I. When I
applied power, I got the attached log on the serial console.

Those sound like reasonable steps...

What's confusing is your screen logs shows a u-boot from bookworm/sid:

U-Boot SPL 2022.04+dfsg-2+b1 (May 14 2022 - 21:25:25 +0000)

So either the images you downloaded were not the images you thought you downloaded... or you saved the wrong screenlog file... or the bullseye
images contain u-boot from the wrong release... or somehow you're
loading u-boot from some other media, such as eMMC?

I actually need to reinstall a cuboxi4pro maybe by the end of the week,
so I will test it myself then.


live well,
vagrant

-----BEGIN PGP SIGNATURE-----

iHUEARYKAB0WIQRlgHNhO/zFx+LkXUXcUY/If5cWqgUCYtTwVQAKCRDcUY/If5cW qlSFAP9OuWWSnmoYTtFZ18NK9gCkep9y2rxdvhspyGop/cyoPwD/Qxgo4bqvMvAI /1zG3Ccfoqendwj3EW+zDu8zhJTukAs=
=U4wf
-----END PGP SIGNATURE-----

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Well, I re-downloaded and re-copied the resulting complete image to a micro-SD card by a different manufacturer, and lo and behold, it all works this time!

Sigh!
Sorry for all the noise,
Rick

On Sun, Jul 17, 2022, at 6:47 PM, Rick Thomas wrote:

On Sun, Jul 17, 2022, at 6:37 PM, Rick Thomas wrote:

I'm experimenting with installing Bullseye on a Cubox-i4Pro I keep
around for testing purposes.

I followed the instructions at:

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/current/images/netboot/SD-card-images/README.concatenateable_images

Then I dd'ed the resulting complete image onto an 8GB microSD card,
which I then inserted into the microSD slot in the Cubox-I. When I
applied power, I got the attached log on the serial console.

Does anyone know what I'm doing wrong? Is this a bug in the installer?
If so, what's the best way for me to volunteer to help as a tester in
debugging it.

Rick
Attachments:
* screenlog

In case it helps, the two components I used in this experiment are:

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/firmware.MX6_Cubox-i.img.gz

and

http://http.us.debian.org/debian/dists/bullseye/main/installer-armhf/20210731+deb11u4/images/netboot/SD-card-images/partition.img.gz

On the web page, these files are dated 2022-07-05 15:57 .

Any clues are appreciated!
Rick

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)