XPost: linux.debian.maint.boot
From:
[email protected]
Package: installation-reports
Debian-installer-version: sarge-rc1
uname -a: Linux sarge 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686 GNU/Linux (RC1)
Date: 2004-08-16 20:00:00
Method: CD-ROM of Sarge-RC1 and daily built as of 2004/08/17 (
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso)
(
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040817/sarge-i386-netinst.iso)
Machine: custom built
Processor: AMD Duron(tm) Processor 750 MHz
Memory: 640 MB
Root Device: SATA
Root Size/partition table:
- problem at earlier stage -
Output of lspci:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 01)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 01)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 08) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 08)
0000:00:0f.0 VGA compatible controller: VMWare Inc [VMWare SVGA II] PCI Display Adapter
0000:00:10.0 SCSI storage controller: BusLogic BT-946C (BA80C30) [MultiMaster 10] (rev 01)
0000:00:11.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 10)
Base System Installation Checklist:
Initial boot worked: [ ]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
1) The PCI-Card of the SATA-Controller (Adaptec 1210SA [Silicon Image chip]), was not detected and thus I could not even install it. SATA has been around
for quite a while by now and should be supported IMHO.
2) Also I am wondering, why when booting with "expert26" at the boot prompt,
I am able to choose at the network hardware detection IDE, Floppy, USB, etc modules where only network modules make sense.
3) Could "ipchains" not be installed with a Kernel >= 2.4?
4) Last of all I am wondering if it is possible to automate at least most of the things for generating installation reports, e. g. by some shell scripts ;)
--
To UNSUBSCRIBE, email to
[email protected]
with a subject of "unsubscribe". Trouble? Contact
[email protected]
--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)