1. Forum
  2. Usenet
  3. LINUX.DEBIAN.BUGS.DIST

  • Bug#266288: Install, Ok apart from german language problems

    From Olaf Mandel@1:229/2 to All on Tue Aug 17 14:30:14 2004
    XPost: linux.debian.maint.boot
    From: [email protected]

    Package: installation-reports

    INSTALL REPORT

    Debian-installer-version: 17.08.2004,
    http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
    uname -a: Linux PC03-153 2.4.25-1-386 #2 Wed Apr 14 19:38:08 EST 2004 i686 GNU/Linux
    Date: Tue Aug 17 13:39:28 CEST 2004
    Method: Install using 2.4 kernel, using RC1 boot-CD, install via
    ftp2.de.debian.org, not proxied

    Machine: Dell OptiPlex GX270N
    Processor: Intel(R) Pentium(R) 4 CPU 2.60GHz
    Memory: 512MB
    Root Device: P-ATA IDE, /dev/hda3
    Root Size/partition table:
    # partition table of /dev/hda
    unit: sectors

    /dev/hda1 : start= 63, size= 48132, Id=83 unused /dev/hda2 : start= 48195, size= 39086145, Id= 7 WinXP Prof /dev/hda3 : start= 39134340, size= 38025855, Id=83, bootable /
    /dev/hda4 : start= 77160195, size= 996030, Id= f
    /dev/hda5 : start= 77160258, size= 995967, Id=82 Swap

    Output of lspci and lspci -n:
    # lspci
    0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
    0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
    0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
    0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
    0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
    0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
    0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
    0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
    0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
    0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
    0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    0000:01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
    # lspci -n
    0000:00:00.0 0600: 8086:2570 (rev 02)
    0000:00:02.0 0300: 8086:2572 (rev 02)
    0000:00:1d.0 0c03: 8086:24d2 (rev 02)
    0000:00:1d.1 0c03: 8086:24d4 (rev 02)
    0000:00:1d.2 0c03: 8086:24d7 (rev 02)
    0000:00:1d.3 0c03: 8086:24de (rev 02)
    0000:00:1d.7 0c03: 8086:24dd (rev 02)
    0000:00:1e.0 0604: 8086:244e (rev c2)
    0000:00:1f.0 0601: 8086:24d0 (rev 02)
    0000:00:1f.1 0101: 8086:24db (rev 02)
    0000:00:1f.2 0101: 8086:24d1 (rev 02)
    0000:00:1f.3 0c05: 8086:24d3 (rev 02)
    0000:00:1f.5 0401: 8086:24d5 (rev 02)
    0000:01:0c.0 0200: 8086:100e (rev 02)

    Base System Installation Checklist:
    [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

    Initial boot worked: [O]
    Configure network HW: [O]
    Config network: [O]
    Detect CD: [ ]
    Load installer modules: [O]
    Detect hard drives: [O]
    Partition hard drives: [O]
    Create file systems: [O]
    Mount partitions: [O]
    Install base system: [O]
    Install boot loader: [O]
    Reboot: [O]

    Comments/Problems:

    Hi, this install worked like a charm. At least in the 2.4 kernel.

    If booted with the linux26 image, I can not switch to the console. The german umlaut characters don't work then (in the installer. If you enter one, it is not displayed
    and neither is any character after that...)

    If booted with the linux24 image, the installer works (apart from some status messages
    with defective umlauts right after choosing these settings). But in the console (Alt-F2)
    the umlauts are displayed defective. I didn't try if this is only a question of the display
    or really of wrong characters ending up in files...

    Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [email protected].




    --
    To UNSUBSCRIBE, email to [email protected]
    with a subject of "unsubscribe". Trouble? Contact [email protected]

    --- SoupGate-Win32 v1.05
    * Origin: you cannot sedate... all the things you hate (1:229/2)