1. Forum
  2. Usenet
  3. LINUX.DEBIAN.BUGS.DIST

  • Bug#259855: pppoeconf: kernel space PPPoE support should be optional /

    From Jan Kreuzer@1:229/2 to All on Fri Aug 13 12:00:15 2004
    From: [email protected]

    Package: pppoeconf
    Version: 1.0.4
    Followup-For: Bug #259855



    -- System Information:
    Debian Release: 3.1
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: i386 (i686)
    Kernel: Linux 2.6.8-rc4-mm1
    Locale: LANG=C, LC_CTYPE=C

    Versions of packages pppoeconf depends on:
    ii ppp 2.4.2+20040428-2 Point-to-Point Protocol (PPP) daem ii pppoe 3.5-3 PPP over Ethernet driver
    ii whiptail [whiptail-prov 0.51.6-5 Displays user-friendly dialog boxe

    -- no debconf information

    Hi
    after updating my system from woody my Internet-connections were really
    slow (no connect to sites that work before and long times until a site is finally
    displayed). After long searching (it took me 2 days) i found that you
    added kernel-space pppoe support to pppoeconf. This unfortunately doesn't work for me (btw
    i have a german dsl-provider called arcor), but the old (aka woody)
    method of user-space pppoe works. So please could you either make
    kernel-space pppoe optional / selectable or post a big warning for poor
    suckers like me that you chnaged the pppoe connect mechanismus.

    Additional Info:

    with kernel space pppoe i get the following in plog:

    Aug 12 11:39:33 server pppd[688]: Timeout waiting for PADO packets
    Aug 12 11:40:03 server pppd[688]: Starting link
    Aug 12 11:40:18 server pppd[688]: PPP session is 1462
    Aug 12 11:40:18 server kernel: NET: Registered protocol family 24
    Aug 12 11:40:18 server pppd[688]: Connect: ppp0 <--> eth1
    Aug 12 11:40:18 server pppd[688]: Couldn't increase MTU to 1500
    Aug 12 11:40:19 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:40:25 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:40:25 server pppd[688]: CHAP authentication succeeded
    Aug 12 11:40:25 server pppd[688]: peer from calling number
    00:90:39:78:C0:0A au
    horized
    Aug 12 11:40:46 server pppd[688]: Local IP address changed to
    82.82.236.40
    Aug 12 11:40:46 server pppd[688]: Remote IP address changed to
    145.253.4.3
    Aug 12 11:40:47 server pppd[688]: Open UDP 82.82.236.40:32813 -> 145.253.2.139:53
    Aug 12 11:43:25 server pppd[688]: No response to 3 echo-requests
    Aug 12 11:43:25 server pppd[688]: Serial link appears to be
    disconnected.
    Aug 12 11:43:25 server pppd[688]: Couldn't increase MTU to 1500
    Aug 12 11:43:25 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:43:31 server pppd[688]: Connection terminated.
    Aug 12 11:43:31 server pppd[688]: Connect time 3.2 minutes.
    Aug 12 11:43:31 server pppd[688]: Sent 42490 bytes, received 7291 bytes

    where as with user-space pppoe support i get the following:

    Aug 13 10:14:16 server pppd[695]: Connect time 11.8 minutes.
    Aug 13 10:14:16 server pppd[695]: Sent 255621 bytes, received 828402
    bytes.
    Aug 13 10:14:46 server pppd[695]: Serial connection established.
    Aug 13 10:14:46 server pppd[695]: Using interface ppp0
    Aug 13 10:14:46 server pppd[695]: Connect: ppp0 <--> /dev/pts/1
    Aug 13 10:14:47 server pppd[695]: CHAP authentication succeeded
    Aug 13 10:14:50 server pppd[695]: local IP address 82.82.234.81
    Aug 13 10:14:50 server pppd[695]: remote IP address 145.253.4.3
    Aug 13 10:14:50 server pppd[695]: primary DNS address
    195.50.140.250
    Aug 13 10:14:50 server pppd[695]: secondary DNS address 145.253.2.81

    Thank you

    Jan Kreuzer


    --
    To UNSUBSCRIBE, email to [email protected]
    with a subject of "unsubscribe". Trouble? Contact [email protected]

    --- SoupGate-Win32 v1.05
    * Origin: you cannot sedate... all the things you hate (1:229/2)
  • From Eduard Bloch@1:229/2 to Jan Kreuzer on Fri Aug 13 13:30:11 2004
    From: [email protected]

    reassign 259855 ppp
    retitle pppoe plugin breaks where pppoe worked before
    thanks

    Hello Jan!

    Please add your dsl-provider file to this report. I am reassigning it to
    ppp since its pppoe plugin is claimed to completely replace the pppoe
    utility, therefore its maintainer should care about such failure.

    Regards,
    Eduard.

    Jan Kreuzer schrieb am Freitag, den 13. August 2004:

    Package: pppoeconf
    Version: 1.0.4
    Followup-For: Bug #259855



    -- System Information:
    Debian Release: 3.1
    APT prefers testing
    APT policy: (500, 'testing')
    Architecture: i386 (i686)
    Kernel: Linux 2.6.8-rc4-mm1
    Locale: LANG=C, LC_CTYPE=C

    Versions of packages pppoeconf depends on:
    ii ppp 2.4.2+20040428-2 Point-to-Point Protocol (PPP) daem
    ii pppoe 3.5-3 PPP over Ethernet driver
    ii whiptail [whiptail-prov 0.51.6-5 Displays user-friendly dialog boxe

    -- no debconf information

    Hi
    after updating my system from woody my Internet-connections were really
    slow (no connect to sites that work before and long times until a site is finally
    displayed). After long searching (it took me 2 days) i found that you
    added kernel-space pppoe support to pppoeconf. This unfortunately doesn't work for me (btw
    i have a german dsl-provider called arcor), but the old (aka woody)
    method of user-space pppoe works. So please could you either make kernel-space pppoe optional / selectable or post a big warning for poor suckers like me that you chnaged the pppoe connect mechanismus.

    Additional Info:

    with kernel space pppoe i get the following in plog:

    Aug 12 11:39:33 server pppd[688]: Timeout waiting for PADO packets
    Aug 12 11:40:03 server pppd[688]: Starting link
    Aug 12 11:40:18 server pppd[688]: PPP session is 1462
    Aug 12 11:40:18 server kernel: NET: Registered protocol family 24
    Aug 12 11:40:18 server pppd[688]: Connect: ppp0 <--> eth1
    Aug 12 11:40:18 server pppd[688]: Couldn't increase MTU to 1500
    Aug 12 11:40:19 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:40:25 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:40:25 server pppd[688]: CHAP authentication succeeded
    Aug 12 11:40:25 server pppd[688]: peer from calling number
    00:90:39:78:C0:0A au
    horized
    Aug 12 11:40:46 server pppd[688]: Local IP address changed to
    82.82.236.40
    Aug 12 11:40:46 server pppd[688]: Remote IP address changed to
    145.253.4.3
    Aug 12 11:40:47 server pppd[688]: Open UDP 82.82.236.40:32813 -> 145.253.2.139:53
    Aug 12 11:43:25 server pppd[688]: No response to 3 echo-requests
    Aug 12 11:43:25 server pppd[688]: Serial link appears to be
    disconnected.
    Aug 12 11:43:25 server pppd[688]: Couldn't increase MTU to 1500
    Aug 12 11:43:25 server pppd[688]: Couldn't increase MRU to 1500
    Aug 12 11:43:31 server pppd[688]: Connection terminated.
    Aug 12 11:43:31 server pppd[688]: Connect time 3.2 minutes.
    Aug 12 11:43:31 server pppd[688]: Sent 42490 bytes, received 7291 bytes

    where as with user-space pppoe support i get the following:

    Aug 13 10:14:16 server pppd[695]: Connect time 11.8 minutes.
    Aug 13 10:14:16 server pppd[695]: Sent 255621 bytes, received 828402
    bytes.
    Aug 13 10:14:46 server pppd[695]: Serial connection established.
    Aug 13 10:14:46 server pppd[695]: Using interface ppp0
    Aug 13 10:14:46 server pppd[695]: Connect: ppp0 <--> /dev/pts/1
    Aug 13 10:14:47 server pppd[695]: CHAP authentication succeeded
    Aug 13 10:14:50 server pppd[695]: local IP address 82.82.234.81
    Aug 13 10:14:50 server pppd[695]: remote IP address 145.253.4.3
    Aug 13 10:14:50 server pppd[695]: primary DNS address
    195.50.140.250
    Aug 13 10:14:50 server pppd[695]: secondary DNS address 145.253.2.81

    Thank you

    Jan Kreuzer



    --
    <Getty> Wie w�rdet ihr remote die Netzwerk-Config restarten?
    <Myon> Sehr vorsichtig?

    --- SoupGate-Win32 v1.05
    * Origin: you cannot sedate... all the things you hate (1:229/2)