XPost: linux.debian.maint.boot
From: [email protected]

Package: installation-reports

INSTALL REPORT

Debian-installer-version: Sarge netinst snaphost jul/221 from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a: Linux orni 2.6.7 #1 Tue Aug 10 12:27:58 BRT 2004 i686 GNU/Linux
Date: jul/22
Method: booted from netinst cd, network install using brazilian mirror ftp.br.debian.org

Machine: ECS G50 Notebook
Processor: Celeron 1.6
Memory: 512 MB
Root Device: Seagate 40Gb - ST94011A, ATA DISK drive
hda: max request size: 1024KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33) EXT3 FS on hda5, internal journal

Root Size/partition table:
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda5 32G 29G 1.6G 95% /
tmpfs 245M 0 245M 0% /dev/shm

Output of lspci and lspci -n:
# lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 651 Host (rev 02) 0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS962 [MuTIOL Media IO] (rev 14)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016 0000:00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] 0000:00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:00:0a.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter

# lspci -n
0000:00:00.0 0600: 1039:0651 (rev 02)
0000:00:01.0 0604: 1039:0001
0000:00:02.0 0601: 1039:0962 (rev 14)
0000:00:02.1 0c05: 1039:0016
0000:00:02.3 0c00: 1039:7007
0000:00:02.5 0101: 1039:5513
0000:00:02.6 0703: 1039:7013 (rev a0)
0000:00:02.7 0401: 1039:7012 (rev a0)
0000:00:03.0 0c03: 1039:7001 (rev 0f)
0000:00:03.1 0c03: 1039:7001 (rev 0f)
0000:00:03.2 0c03: 1039:7001 (rev 0f)
0000:00:03.3 0c03: 1039:7002
0000:00:04.0 0200: 1039:0900 (rev 91)
0000:00:0a.0 0607: 1524:1410
0000:01:00.0 0300: 1039:6325

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]

Comments/Problems:

CardBus Card not correctly detected when inserted!

cardctl shows there is a card
# cardctl status
Socket 0:
3.3V CardBus card
function 0: [ready]

then lspci shows exactly the same output as above (without the card inserted) and cardmgr doesn't detect the card !

ii pcmcia-cs 3.2.5-8 PCMCIA Card Services for Linux

I don't know if this is a kernel issue, so i'm posting here anyway.

Except for the xfree config file, that i've used the one generated by knoppix to avoid manually configuring, everything else worked perfectly.




--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)