XPost: linux.debian.kernel
From:
[email protected]
Package: kernel-image-2.6.7-1-686
Version: 2.6.7-2
Severity: normal
Attempting to put an IBM T41p to sleep does not work. The following
chunk of kernel log shows why:
Aug 20 03:10:09 localhost kernel: e1000: eth0: e1000_watchdog: NIC Link
is Up 100 Mbps Full D
uplex
Aug 20 03:10:12 localhost kernel: PM: Preparing system for suspend
Aug 20 03:10:17 localhost kernel: Stopping tasks: ===========================================
=============================|
Aug 20 03:10:17 localhost kernel: PCI: Setting latency timer of device 0000:00:1d.7 to 64
Aug 20 03:10:17 localhost kernel: Could not suspend device 0000:00:1d.7:
error -5
Aug 20 03:10:17 localhost kernel: PCI: Enabling device 0000:00:1f.5
(0000 -> 0003)
Aug 20 03:10:17 localhost kernel: i810_audio: Primary codec has ID 0
Aug 20 03:10:17 localhost kernel: ac97_codec: AC97 Audio codec, id:
ADS116 (Unknown)
Aug 20 03:10:17 localhost kernel: PCI: Setting latency timer of device 0000:00:1f.6 to 64
Aug 20 03:10:17 localhost kernel: Restarting tasks... done
Aug 20 03:10:17 localhost kernel: apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)
Aug 20 03:10:17 localhost kernel: apm: overridden by ACPI.
Aug 20 03:10:19 localhost kernel: e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
Device 1d.7 according to lspci -vvv is as follows:
0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB
2.0 EHCI Controller (rev 01) (prog-if20 [EHCI])
Subsystem: IBM: Unknown device 052e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0
DScale=0 PME-
Capabilities: [58] #0a [2080]
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.7-1-686
Locale: LANG=C, LC_CTYPE=C
Versions of packages kernel-image-2.6.7-1-686 depends on:
ii coreutils [fileutils] 5.2.1-2 The GNU core utilities
ii initrd-tools 0.1.71 tools to create initrd image for p ii module-init-tools 3.1-pre5-3 tools for managing Linux kernel mo
-- no debconf information
--
To UNSUBSCRIBE, email to
[email protected]
with a subject of "unsubscribe". Trouble? Contact
[email protected]
--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)