XPost: linux.debian.maint.boot
From: [email protected]

Package: installation-reports

INSTALL REPORT

Debian-installer-version:
Aug. 18, 2004.
I got businesscard CD image for i386 from http://www.debian.org/devel/debian-installer/

uname -a:
Linux hou 2.6.7-1-k7 #1 Thu Jul 8 06:45:35 EDT 2004 i686 GNU/Linux

Date: Aug. 18, 2004 around 9PM to 10PM CST

Method: I booted off from the CD I made from the above businesscard CD
image.
My APT pointed at:
#deb http://mirrors.kernel.org/debian/ sarge main
deb http://mirrors.kernel.org/debian/ testing main
No proxy.
I chose to install 'Desktop Enviroment'

Machine: self-built.

Processor: AMD Athlon(tm) Processor stepping 01 (800M)

Memory: 512MB

Root Device: WDC WD205AA, ATA DISK drive; hda

Root Size/partition table:
Root Size is 180.9M.
DISK capacity 20GB.

Mount point size Partition fs
Win2K 6,200 M #1 Primary NTFS
/boot 82.2M #3 Primary ext3
Extended --------
Win2K 5,200 M #5 Logical NTFS
/fat32 600.4M #6 Logical fat32
/usr 3,500 M #7 Logical ext3
/var 1,600 M #8 Logical ext3
/tmp 600.4M #9 Logical ext3
/home 1,600 M #12 Logical ext3
swap 797.8M #11 Logical swap
/ 180.9M #10 Logical ext3

---fstab:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda10 / ext3 defaults,errors=remount-ro 0
1
/dev/hda3 /boot ext3 defaults 0 2
/dev/hda6 /fat32 vfat defaults 0 2
/dev/hda12 /home ext3 defaults 0 2
/dev/hda9 /tmp ext3 defaults 0 2
/dev/hda7 /usr ext3 defaults 0 2
/dev/hda8 /var ext3 defaults 0 2
/dev/hda11 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0


Output of lspci and lspci -n:
$ lspci
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System Controller (rev 25)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate]
AGP Bridge (rev 01)
0000:00:04.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97]
(rev 08)
0000:00:06.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev
10)
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 1b)
0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e)
0000:00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
(rev 20)
0000:01:05.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP
(rev 01)

$ lspci -n
0000:00:00.0 0600: 1022:7006 (rev 25)
0000:00:01.0 0604: 1022:7007 (rev 01)
0000:00:04.0 0401: 1274:1371 (rev 08)
0000:00:06.0 0200: 1186:1300 (rev 10)
0000:00:07.0 0601: 1106:0686 (rev 1b)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 0e)
0000:00:07.4 0c05: 1106:3057 (rev 20)
0000:01:05.0 0300: 102b:0521 (rev 01)


Base System Installation Checklist:
[O] = OK

Initial boot worked: [Y]
Configure network HW: [Y]
Config network: [Y]
Detect CD: [Y]
Load installer modules: [Y]
Detect hard drives: [Y]
Partition hard drives: [Y]
Create file systems: [Y]
Mount partitions: [Y]
Install base system: [Y]
Install boot loader: [Y]
Reboot: [Y]

Comments/Problems:

Installation has never been so easy.
It configured my networking and X windowing automatically.
Wonderful job!!!

Thanks.

--
Xiaobo Peng



--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)