XPost: linux.debian.maint.boot
From: [email protected]

Package: installation-reports

Debian-installer-version: RC1 from http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso
uname -a: Linux (none) 2.6.7-1-386 #1 Thu Jul 8 05:08:04 EDT 2004 i686
unknown
Date: August 19th, 22:43 CEST
Method: Install from netinst CD, booting with either 2.4 or 2.6

Machine: Intel D915GEVL board
Processor: Intel Pentium IV 2.8 GHz
Memory: 1GB DDR2
Root Device: Seagate 200GB SATA (on ICH6 SATA controller)
Root Size/partition table:
Output of lspci and lspci -n: netinst shell doesn't have lspci it
seems, and I don't have a working linux installation on it

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [E]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]

Comments/Problems:

Network hardware detection does not find the onboard e100 and prompts
to load the network driver.
The SATA drives don't get detected. Manually loading libata and
ata_piix didn't help.



--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)

XPost: linux.debian.maint.boot
From: [email protected]

Christian Hofst�dtler wrote:

Output of lspci and lspci -n: netinst shell doesn't have lspci it
seems, and I don't have a working linux installation on it

Knoppix, or send us /proc/bus/pci/devices and /proc/pci.

Network hardware detection does not find the onboard e100 and prompts
to load the network driver.
The SATA drives don't get detected. Manually loading libata and
ata_piix didn't help.

We can't fix these without the PCI info.

--
see shy jo

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)

iD8DBQFBJdYcd8HHehbQuO8RAnm+AJsG67e1A+onlZnoS7TP1r9Jm6/8FgCgusII 8fI2LgCL4MwgAEZgGW4J070=
=SPnL
-----END PGP SIGNATURE-----

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)

XPost: linux.debian.maint.boot
From: [email protected]

Output of lspci and lspci -n: netinst shell doesn't have lspci it
seems, and I don't have a working linux installation on it

Knoppix, or send us /proc/bus/pci/devices and /proc/pci.

Please see my last bug update.

The SATA drives don't get detected. Manually loading libata and
ata_piix didn't help.

We can't fix these without the PCI info.

I have now upgraded to a custom 2.6.8 kernel, and SATA now works on the installed system.
Debian's kernel-image-2.6.8-1-686-smp from unstable didn't work,
though. I can send you my kernel config if of any help.

--
Christian



--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)

XPost: linux.debian.maint.boot
From: [email protected]

Christian Hofst�dtler wrote:

Output of lspci and lspci -n: netinst shell doesn't have lspci it
seems, and I don't have a working linux installation on it

Knoppix, or send us /proc/bus/pci/devices and /proc/pci.

Please see my last bug update.

Thanks.

I have now upgraded to a custom 2.6.8 kernel, and SATA now works on the installed system.
Debian's kernel-image-2.6.8-1-686-smp from unstable didn't work,
though. I can send you my kernel config if of any help.

It would probably be better to file a separate bug on that package.

--
see shy jo

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)

iD8DBQFBJeSZd8HHehbQuO8RAq3fAKCDdKY7rydK83yyuBdW1fL9tvwv8ACgoR6W iuiF298bBVBdSjkdrPWRYjI=
=PBWf
-----END PGP SIGNATURE-----

--- SoupGate-Win32 v1.05
* Origin: you cannot sedate... all the things you hate (1:229/2)