How can this be done given your WAN IP address is a.b.c.d

and you LAN addresses are 192.168.x.y/16 ?
--
Member - Liberal International This is [email protected] Ici [email protected]
Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism https://www.empire.kred/ROOTNK?t=94a1f39b Evil exists, and it can be invented. -unknown Beware https://mindspring.com

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

In article <u5a0mc$2p7vd$[email protected]>,
Gilbert VAISSIERE <[email protected]> wrote:

Le 31/05/2023 à 16:39, The Doctor a écrit :

How can this be done given your WAN IP address is a.b.c.d

and you LAN addresses are 192.168.x.y/16 ?

Hello,

If I understand your question, you need "Port forwarding" : >https://docs.opnsense.org/manual/nat.html

Public destination address : a.b.c.d
Public source address : any
Public ports 80/TCP and 443/TCP
Private destination address : 192.168.x.y (IP address of your server)
Private ports : same as public

You probably also need to allow incoming trafic (filtering rules) if no >automatic rules for port forwarding : >https://docs.opnsense.org/manual/firewall.html
I don't use OpnSense and can't tell if destination address must be
public or private (before or after NAT)

Best regards
Gilbert VAISSIERE

Thank you / Merci !
--
Member - Liberal International This is [email protected] Ici [email protected]
Yahweh, King & country!Never Satan President Republic!Beware AntiChrist rising! Look at Psalms 14 and 53 on Atheism https://www.empire.kred/ROOTNK?t=94a1f39b Belief changes a person, all else is just talk. -unknown Beware https://mindspring.com

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Le 31/05/2023 à 16:39, The Doctor a écrit :

How can this be done given your WAN IP address is a.b.c.d

and you LAN addresses are 192.168.x.y/16 ?

Hello,

If I understand your question, you need "Port forwarding" : https://docs.opnsense.org/manual/nat.html

Public destination address : a.b.c.d
Public source address : any
Public ports 80/TCP and 443/TCP
Private destination address : 192.168.x.y (IP address of your server)
Private ports : same as public

You probably also need to allow incoming trafic (filtering rules) if no automatic rules for port forwarding : https://docs.opnsense.org/manual/firewall.html
I don't use OpnSense and can't tell if destination address must be
public or private (before or after NAT)


Best regards
Gilbert VAISSIERE

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)