Hi folks.
Me, asking again out of desperation...

Fay has been doing some file/disk housekeeping and found a few files from
the last century which she can't read and make sense of.

She thinks it was written in a text "thing..."

I've tried in StrongED, Zap etc, but they just display some sort of
document formatting, I think.

I've also tried, Imp Publisher, Style, Imp Junior and InterWord, and I
would try WordWise+ but I did have, but can't now find the WW+ emulator I
used to have, so I can't test that out.

The first line of the files start with...

�'d@xV4 etc... (And in case Pluto excises the characters).

Hat
w ' d@ x V4 etc...

Anyone have any idea?

Thanks
Dave

--

Dave Triffid

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

Dave <[email protected]> wrote:

Hi folks.
Me, asking again out of desperation...

Fay has been doing some file/disk housekeeping and found a few files from
the last century which she can't read and make sense of.

She thinks it was written in a text "thing..."

I've tried in StrongED, Zap etc, but they just display some sort of
document formatting, I think.

I've also tried, Imp Publisher, Style, Imp Junior and InterWord, and I
would try WordWise+ but I did have, but can't now find the WW+ emulator I used to have, so I can't test that out.

The first line of the files start with...

?'d@xV4 etc... (And in case Pluto excises the characters).

I vaguely remember '@xV4' being an Impression Style/Publisher header. I'm
not sure if there's a difference in filetype between the two, but I'd try
both. I think Junior used an application directory rather than single file
(at least I know Impression II did).

Theo

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

T24gMDgvMDEvMjAyNSAxNjozMSwgRGF2ZSB3cm90ZToNCj4gRmF5IGhhcyBiZWVuIGRvaW5n IHNvbWUgZmlsZS9kaXNrIGhvdXNla2VlcGluZyBhbmQgZm91bmQgYSBmZXcgZmlsZXMgZnJv bQ0KPiB0aGUgbGFzdCBjZW50dXJ5IHdoaWNoIHNoZSBjYW4ndCByZWFkIGFuZCBtYWtlIHNl bnNlIG9mLg0KPiANCj4gU2hlIHRoaW5rcyBpdCB3YXMgd3JpdHRlbiBpbiBhIHRleHQgInRo aW5nLi4uIg0KPiANCj4gSSd2ZSB0cmllZCBpbiBTdHJvbmdFRCwgWmFwIGV0YywgYnV0IHRo ZXkganVzdCBkaXNwbGF5IHNvbWUgc29ydCBvZg0KPiBkb2N1bWVudCBmb3JtYXR0aW5nLCBJ IHRoaW5rLg0KPiANCj4gSSd2ZSBhbHNvIHRyaWVkLCBJbXAgUHVibGlzaGVyLCBTdHlsZSwg SW1wIEp1bmlvciBhbmQgSW50ZXJXb3JkLCBhbmQgSQ0KPiB3b3VsZCB0cnkgV29yZFdpc2Ur IGJ1dCBJIGRpZCBoYXZlLCBidXQgY2FuJ3Qgbm93IGZpbmQgdGhlIFdXKyBlbXVsYXRvciBJ DQo+IHVzZWQgdG8gaGF2ZSwgc28gSSBjYW4ndCB0ZXN0IHRoYXQgb3V0Lg0KPiANCj4gVGhl IGZpcnN0IGxpbmUgb2YgdGhlIGZpbGVzIHN0YXJ0IHdpdGguLi4NCj4gDQo+IOKAmidkQHhW NCAgZXRjLi4uIChBbmQgaW4gY2FzZSBQbHV0byBleGNpc2VzIHRoZSBjaGFyYWN0ZXJzKS4N Cj4gDQo+IEhhdA0KPiB3ICAnIGRAICB4IFY0ICBldGMuLi4NCg0KUHJldHR5IG1lYW5pbmds ZXNzLCB1c2UgdGhlICpkdW1wIGNvbW1hbmQgdG8gZGlzcGxheSB0aGUgZmlsZSBhcyBieXRl cyANCmFuZCBhc2NpaSBhbmQgcGFzdGUgdGhlIGZpcnN0IGxpbmUgaW4gdG8gdGhlIGVtYWls Lg0KDQo+IEFueW9uZSBoYXZlIGFueSBpZGVhPw0KDQpUaGVyZSBhcmUgYSBjb3VwbGUgb2Yg b2xkICgyNiBiaXQgb25seSkgcHJvZ3JhbXMgY2FsbGVkICFSZWNvZ25pc2UgYW5kIA0KIVR5 cGVGaW5kIHdoaWNoIG1heSBiZSBhYmxlIHRvIGlkZW50aWZ5IHRoZSBmaWxlcywgaWYgeW91 IGNhbiBmaW5kIHRoZW0uDQoNCi0tLWRydWNrDQoNCg==

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

In article <zSw*[email protected]>,
Theo <[email protected]> wrote:

Dave <[email protected]> wrote:

Hi folks.
Me, asking again out of desperation...
Fay has been doing some file/disk housekeeping and found a few files
from the last century which she can't read and make sense of.

She thinks it was written in a text "thing..."

I've tried in StrongED, Zap etc, but they just display some sort of document formatting, I think.

I've also tried, Imp Publisher, Style, Imp Junior and InterWord, and I would try WordWise+ but I did have, but can't now find the WW+
emulator I used to have, so I can't test that out.

The first line of the files start with...

?'d@xV4 etc... (And in case Pluto excises the characters).

I vaguely remember '@xV4' being an Impression Style/Publisher header.
I'm not sure if there's a difference in filetype between the two, but
I'd try both. I think Junior used an application directory rather than single file (at least I know Impression II did).

Theo

Initially, I'd tried ImpDoc and bc5 as a file type, but at the time, that didn't do the business.

After I'd posted the above, I tried a lot of stuff to get her info out of
the files.

Eventually, and don't ask me what I did, I succeeded in getting Imp Style
to load the files and then resave the documents.

Considering the datestamp on the files it must have been when we were
using Imp Style, but that's a long time ago, so it's very vague now.

Yes, Junior did use the Appdir rather than a single file, but Style and Publisher had a Menu-File- option to "Save as a Single file".

I remember back then we did a lot of resaving old Junior appdir file out
of Imp Style to make them Single files.

Dave

--

Dave Triffid

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 8 Jan 2025 as I do recall,
Theo wrote:

Dave <[email protected]> wrote:

Hi folks.
Me, asking again out of desperation...

Fay has been doing some file/disk housekeeping and found a few files from the last century which she can't read and make sense of.

She thinks it was written in a text "thing..."

I've tried in StrongED, Zap etc, but they just display some sort of document formatting, I think.

I've also tried, Imp Publisher, Style, Imp Junior and InterWord, and I would try WordWise+ but I did have, but can't now find the WW+ emulator I used to have, so I can't test that out.

The first line of the files start with...

?'d@xV4 etc... (And in case Pluto excises the characters).

I vaguely remember '@xV4' being an Impression Style/Publisher header. I'm not sure if there's a difference in filetype between the two, but I'd try both.

My Impression Publisher files (dating back to 1997) all seem to have 00
78 56 34 at an offset of characters four to seven from the start of the
file (which displays as @xV4 in StrongED's dump mode). If you scroll
down they also tend to contain large numbers of zero bytes with
font/style names and then bits of readable text content.

You can try setting them to filetype &BC5 (ImpDoc) and seeing if they
will load into any version of Impression that accepts single files. The insides of Impression application-directory-style documents basically
look the same, and also contain the '@xV4' string near the beginning,
but are of filetype &D87 (DocData) and cannot be loaded by dragging them directly into Impression or by double-clicking on them.

If you've got one of these then you need the application directory to go
with it, which will have each separate chapter as a subdirectory
containing graphics and a file of type &D88 (Text). These contain the
main text of the document but do *not* start with the @xv4 string....


--
Harriet Bazley == Loyaulte me lie ==

The nice thing about standards is that there are so many to choose from

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

In message <vlmnec$2ue36$[email protected]>
druck <[email protected]> wrote:

On 08/01/2025 16:31, Dave wrote:

Fay has been doing some file/disk housekeeping and found a few files from
the last century which she can't read and make sense of.

She thinks it was written in a text "thing..."

I've tried in StrongED, Zap etc, but they just display some sort of
document formatting, I think.

I've also tried, Imp Publisher, Style, Imp Junior and InterWord, and I
would try WordWise+ but I did have, but can't now find the WW+ emulator I
used to have, so I can't test that out.

The first line of the files start with...

''d@xV4 etc... (And in case Pluto excises the characters).

Hat
w ' d@ x V4 etc...

Pretty meaningless, use the *dump command to display the file as bytes
and ascii and paste the first line in to the email.

Anyone have any idea?

There are a couple of old (26 bit only) programs called !Recognise and !TypeFind which may be able to identify the files, if you can find them.

---druck

I have !TypeFind 32 bit version.


--
Jean-Michel

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

On 13/01/2025 19:10, Jean-Michel wrote:

In message <vlmnec$2ue36$[email protected]>
druck <[email protected]> wrote:

There are a couple of old (26 bit only) programs called !Recognise and
!TypeFind which may be able to identify the files, if you can find them.

---druck

I have !TypeFind 32 bit version.

Is it available to download from anywhere?

---druck

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

In article <[email protected]>,
Jean-Michel <[email protected]> wrote:

[Snip]

I have !TypeFind 32 bit version.

As we are still working through Fay's old backups etc...

Do you have a URL from where !TypeFind might be available?

Thanks
Dave

--

Dave Triffid

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

In message <vm3v36$21dqg$[email protected]>
druck <[email protected]> wrote:

On 13/01/2025 19:10, Jean-Michel wrote:

In message <vlmnec$2ue36$[email protected]>
druck <[email protected]> wrote:

There are a couple of old (26 bit only) programs called !Recognise and
!TypeFind which may be able to identify the files, if you can find them. >>>
---druck

I have !TypeFind 32 bit version.

Is it available to download from anywhere?

---druck

Just uploaded here.

https://jeanmichelb.riscos.fr/TempFiles.html


--
Jean-Michel

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)