On Thursday, May 13, 2004 at 2:39:41 AM UTC+4:30, Quaoar wrote:

David Bolenberg wrote:

I´m using 2 LaserJet 1200 printers with identical software on
the basis of DOS, Win ME and Win 98 SE.
The purpose is to exchange printers without making changes in
the software or to alter the setup before starting a programme.
Now, the problem is: The two LJ 1200 have different OFFSETS.
Vertical about 1/8", horizontal about one character.
For this reason I´m not able to fill (official) forms properly.
I asume it to be a matter of mechanical adjustment. Is it possible
to do the adjustment myself? How?
Or can this offset be altered by software permanently to make
the two printers identical?
So far I have not found any hint concerning this problem.
can anyone help.
Thanks in advance.
David

The page control language quick reference guide is on the following
site. It has complete page property commands that might be used for resetting the default left margin and top.

http://tinyurl.com/2ossr

http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179111&taskId=101&prodTypeId=18972&prodSeriesId=29789

Q

The Khaefi Ltd. is one of the worldwide & largest corporate for sales of printing equipment. Our business headquarter is in Germany and you could find and purchase your printing machines with us and if you wish to sale your second-hand printing machines
we are interested in itEmail Address : [email protected]

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)