In article <100a4b3$dohh$
[email protected]>,
Kalevi Kolttonen <
[email protected]> wrote:
I just asked chatGPT
:-P
whether Apple II floppy disk
controller card support two drives and it answered
yes. However, chatGPT claims that I am supposed to
connect both floppy drives to the controller card
using a *single* ribbon cable. Can this be true?
Nope. If you're using period-correct Disk II floppy drives (or workalikes) with the matching controller, there are two 20-pin headers on the controller that will handle one drive each.
Later 5.25" drives didn't use a ribbon cable, but a round cable ending in a DB-19 plug that plugged into a slightly different controller with a matching jack (or into the floppy connector on a IIGS, IIc, or IIc Plus). A second drive would be daisy-chained off the first (except for the DuoDisk, which
was daisy-chained internally).
--
_/_
/ v \ Scott Alfter (remove the obvious to send mail)
(IIGS(
https://alfter.us/ Top-posting!
\_^_/ >What's the most annoying thing on Usenet?
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)