Leon,
Thanks for your report on the Xerox B210 laser printer working with the
IIGS, the Tree Hugger TCP/IP port driver and the Direct Connect
PostScript Printer Driver.
As you've shown, the DCPPD works with the PostScript Level 3 built into
that printer. Since that printer also has PCL 5/6, you can use the
Harmonie PCL printer driver with it should you want to try it out as well.
Of course, the Harmonie PCL driver will be much slower and probably not
provide the resolution that the PostScript driver does, but there may be
some features in it that the PostScript driver does not offer.
I see that Xerox has now introduced the Model B230 to replace the Model
B210. The B230 should work at least as well as the B210 does since it
includes both PCL 5/6 and PostScript Level 3. At a cost of $170, it
would seem to be a very good value.
BTW -- I never would have attempted the DCPPD without Ewen Wannop's
wonderful tools - ChewBagger and BrkDown. So, I share your thanks with him.
Hugh Hood
On 9/19/2022 12:11 AM, Leon wrote:
Xerox B210 B&W laser printer works right out of the box with Tree
Hugger. Printed from AWGS just text with one line tabbed to see if
it handled basic page margins. The other image is from MiniPaint the
samples image. Current connection is Ethernet to airport express.
It did not work with address: port just with address. I will try to
print via WiFI but my Mac is in another room and setup has to be USB
to enable WI-FI.
The sample images I hint at were posted on Slack the Appleiigs
thread.
Thank you to Hugh Hood for checking out the PCL and PS version to see
if this would even work.
Not sure about the PCL but the PS certainly does.
Leon
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)