On Friday, July 22, 2022 at 8:13:10 PM UTC-5, Joseph Navarro wrote:
Has anybody been able to setup a MacSD SCSI on an Apple2GS. The closest I have been is on a ROM03 but not quite. It keeps asking to install the SCSI drivers. I'm using GSOS 6.0.4 with SCSI drivers for a Hard Drive.
The SCSI cards tested so far was the RAMFast Rev. C & GGLabs SCSI.
The MacSD.ini has 4 drives setup:
ID0: ProDOS0 (32MB)
ID1: ProDOS1 (32MB)
ID2: HFS2 (2GB)
ID4: HFS3 (2GB)
There is no Termination on the SCSI chain except what is provided by the MacSD.
Any help would be greatly appreciated.
The first SCSI device read is the highest ID, so try reversing your order.
Todd
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)