1. Forum
  2. Usenet
  3. COMP.SYS.UNISYS

  • HMP 1.0 and the InterPro release

    From ramseyhere@21:1/5 to All on Thu Sep 7 11:21:58 2023
    Who can recall the year that the "InterPro" release for MCP systems came out? This was when COMS/MARC/ADDS/SDF/etc. came out. I am pretty sure this was also the first HMP release - but could be wrong on that point. I know I worked on a major
    conversion from a B1000 to A3 where this was our first MCP release on the A3. We used all the tools to do their migration.
    Thanks in advance!
    ler

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Pete Mullins@21:1/5 to ramseyhere on Thu Sep 14 01:33:29 2023
    On Thursday, September 7, 2023 at 8:22:00 PM UTC+2, ramseyhere wrote:
    Who can recall the year that the "InterPro" release for MCP systems came out? This was when COMS/MARC/ADDS/SDF/etc. came out. I am pretty sure this was also the first HMP release - but could be wrong on that point. I know I worked on a major conversion
    from a B1000 to A3 where this was our first MCP release on the A3. We used all the tools to do their migration.
    Thanks in advance!
    ler

    I was one of the instructors on the 3.5 NPIT, February, 1985. We ran the TOI afterwards.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From ramseyhere@21:1/5 to Pete Mullins on Thu Sep 14 14:14:28 2023
    On Thursday, September 14, 2023 at 4:33:31 AM UTC-4, Pete Mullins wrote:
    On Thursday, September 7, 2023 at 8:22:00 PM UTC+2, ramseyhere wrote:
    Who can recall the year that the "InterPro" release for MCP systems came out? This was when COMS/MARC/ADDS/SDF/etc. came out. I am pretty sure this was also the first HMP release - but could be wrong on that point. I know I worked on a major
    conversion from a B1000 to A3 where this was our first MCP release on the A3. We used all the tools to do their migration.
    Thanks in advance!
    ler
    I was one of the instructors on the 3.5 NPIT, February, 1985. We ran the TOI afterwards.
    That puts a definite pin in the date/release for COMS and its buddies. Thanks.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Paul Kimpel@21:1/5 to ramseyhere on Sun Sep 17 07:35:14 2023
    On 9/14/2023 2:14 PM, ramseyhere wrote:
    On Thursday, September 14, 2023 at 4:33:31 AM UTC-4, Pete Mullins wrote:
    On Thursday, September 7, 2023 at 8:22:00 PM UTC+2, ramseyhere wrote:
    Who can recall the year that the "InterPro" release for MCP systems came out? This was when COMS/MARC/ADDS/SDF/etc. came out. I am pretty sure this was also the first HMP release - but could be wrong on that point. I know I worked on a major
    conversion from a B1000 to A3 where this was our first MCP release on the A3. We used all the tools to do their migration.
    Thanks in advance!
    ler
    I was one of the instructors on the 3.5 NPIT, February, 1985. We ran the TOI afterwards.
    That puts a definite pin in the date/release for COMS and its buddies. Thanks.

    MCP 3.5 (or III.5 as we would have written it then) ca. 1985 sounds
    about right to me for COMS and MARC. It couldn't have been much earlier
    than that. I'm not sure that SDF was available with the initial release
    of COMS, but came soon later if not.

    As I recall, HMP 1.0 came out much later -- in conjunction with the
    NX-series machines in 1996.

    Paul

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)