On Sunday, 30 April 2023 at 04:20:00 UTC+2, Stephen Fuld wrote:
On 4/29/2023 2:53 PM, Einar Flaathe wrote:
On Saturday, 29 April 2023 at 17:34:35 UTC+2, Einar Flaathe wrote:
On Thursday, 6 September 2018 at 15:36:12 UTC+2, setala wrote:
Thanks Steve, I got it working!
Regards,
--Saku OH6PU
I am new to PS2200, and I have tried Steve Rikards instruction:
"Here are the steps to allow telnet access to ps2200 in ROS."
I started telnet on Windows 10, and from on the ROS consol I entered:
cs a
st cpcomm,,,0/security
0-ENTER C.L. FOR : .CPCOMM
st silas,,,0/security
1-ENTER C.L. FOR : .SILAS
putty;host 127.0.0.3;select telcon (port 23)
KEY ERROR
Command:
I would like to be able to have FTP access to ps2200 on port 21 as well. >>
WS_FTP Professional worked well with ClearPath MCP Express (host type Unisys A-series) and
it has setting for host type OS2200.
Any help would be much appreciated.
Best regards,
Einar Flaathe
I had another go - but it's still not working, viz:
ROS consol
cs a
st cpcomm,,,0/security
0-ENTER C.L. FOR : .CPCOMM
st silas,,,0/security
1-ENTER C.L. FOR : .SILAS
Command:
Microsoft Telnet> o
( to ) 127.0.0.3
Connecting To 127.0.0.3...Could not open connection to the host, on port 23: Connect failed
Microsoft Telnet>
Are you answering the outstanding messages asking for the CLs?
--
- Stephen Fuld
(e-mail address disguised to prevent spam)
Thank you for your reply!
I am new to ClearPath OS 2200 and - No I did not answer the outstanding messages.
I searched ClearPath OS 2200 Release 18.0 Product Documentation Library
for ‘ENTER C.L. FOR :’ and found it in three places.
I learned that it was a ‘read-and-reply message’
The System Console Message reference Manual had:
The responses to this solicitation are the clearance level, blanks, or a null. A null
response or blanks receives the minimum clearance level for the user-id.
And FLIT Programming Reference Manual, Volume 2: System Mode had an example:
ST SYS$*RUN$.CONSOL,,,0/SECURITY
0-ENTER C.L. FOR : SYS$*RUN$.CONSOL
0 0
So I copied the answer and now the telnet session is established, but
I cannot see what I am typing… and I do not know the PS2200
command to exit Telnet.
But why reply with two zeros not just one?
(Clearance levels can range from 0 to 63, with 63 being the most restrictive.)
Here all the events:
ROS CONSOLE
cs a
st cpcomm,,,0/security
ENTER C.L. FOR : .CPCOMM
0 0
CPCOMM START
CPCOMM*CCB105500: Configuration processing is complete.
CPCOMM* Number of errors: 0
CPCOMM*CCB109001: CPCommOS is ready.
CPCOMM*CCB109005: CPCommOS to XNIOP interface initialization complete.
CPCOMM* XNIOP level: 5.24.1
st silas,,,0/security
ENTER C.L. FOR : .SILAS
0 0
SILAS START
SILAS *System Interface for Legacy Application Systems
SILAS * 3R5 3-50-5 30 APR 23 13:01:40 MODE A SITE PART-1
SILAS *Config version: WRC002
SILAS *Trace file opened : SILAS$A*TRACE(1)
SILAS *Log file opened : SILAS$A*LOG(1)
SILAS *PROCESS CSACSU is up.
SILAS *PROCESS RSDCSU is up.
CPCOMM*CCB121000: Process CSACSU has attached.
SILAS *CSACSU is attached to the TP0 interface.
CPCOMM*CCB121000: Process TELRSI has attached.
SILAS *RSDCSU is attached to the TELNET interface.
CPCOMM*CCB121000: Process RSDCSU has attached.
SILAS *RSDCSU is attached to the TP0 interface.
SILAS *Failed to connect with MCB # 01.
SILAS *Failed to connect with MCB # 03.
SILAS *PROCESS TIPCSU is up.
CPCOMM*CCB121000: Process TIPCSU has attached.
SILAS *TIPCSU is attached to the TP0 interface.
Command:
WINDOWS
Welcome to Microsoft Telnet Client
Escape Character is 'CTRL+¨'
Microsoft Telnet> o
( to ) 127.0.0.3
Enter your user-id/password and clearance level:
*UNISYS 1100 Operating System Level 49R4.30PSE (RSI)*
Current session number: 194
Previous session was: SUN 30 APR 2023 13:02:48 CEST
Thanks once again!
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)