Hi,
Hatari 2.3.0 the ATARI emulator was released a few days ago...
<
https://download.tuxfamily.org/hatari/2.3.0/>
I made a video demonstration with a Falcon030 at 32MHz / TOS4.04:
<
https://www.youtube.com/watch?v=SLm5ayChv9Q>
It's the replay of the GEM sequence "EUREKA.REC" with my software,
with the "RECORD.ACC" accessory. The issue is I used TOS4.04, but
I wanted to use EmuTOS 1.0 instead, because I know EmuTOS works with appl_tplay() and appl_trecord() system calls. But when I switched
Hatari to boot on EmuTOS 1.0, the FPU (68882) was disabled...
<
http://eureka.atari.org/Hatari230.png>
So, when I start my Eureka 2.12 software, that makes usage of the FPU,
there's a floating point error (LineF).
Is it a known issue ? Why is the FPU disabled when booting EmuTOS ?
Thanks by advance for any help =)
Best regards,
--
Fran�ois LE COAT
Author of Eureka 2.12 (2D Graph Describer, 3D Modeller)
http://eureka.atari.org/
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)