On Thursday, July 27, 2023 at 3:18:00 PM UTC-4, Jose Deras wrote:
On Thursday, January 7, 2021 at 1:14:46 AM UTC-6, [email protected] wrote:
Also looking for these. If anyone could 3d print me a couple and send them my way I’d pay a fair few dollars. 5.25 bezels for the 9595/8595 would be welcome too.
Replying to bump my thread here. Anyone have a 3d STL for the bezel/rails for a PS/2 Model 90 CD-ROM? Since the best option is just the trim for a generic 5.25" drive that would be even more versatile.
Or a real until to measure for us to design such a print?
All of those parts are available in stl format on "thingverse" for free. along with many other 3d printable IBM copied parts...
The cdrom sled and front bezel for a model 95 print better using petg filament. and print better if you add supports
and remove them from the finished parts. The bridging was too far for my printer...
I had to mess with the overall finished part size as well . before the slicer...
They were setup with too long of bridging for my makerbot printer...
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)