1. Forum
  2. Usenet
  3. COMP.SYS.IBM.PS2.HARDWARE

  • DCAS jumpers

    From Louis Ohland@21:1/5 to Pertti Helander on Sun Mar 26 18:29:46 2023
    IBM loved the ANSI standard of ID6.

    https://www.ardent-tool.com/IBM_HD/dcas3_ig.pdf

    Pertti Helander wrote:
    In sellers ad was a picture of formatting in which I can see that SCSI ID is 0.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Pertti Helander@21:1/5 to All on Mon Mar 27 01:19:14 2023
    maanantai 27. maaliskuuta 2023 klo 2.29.49 UTC+3 Louis Ohland kirjoitti:
    IBM loved the ANSI standard of ID6.

    https://www.ardent-tool.com/IBM_HD/dcas3_ig.pdf
    Pertti Helander wrote:
    In sellers ad was a picture of formatting in which I can see that SCSI ID is 0.
    This is very helpful! I will check jumper setting for HDD.
    Thank You Louis for your help and patience to me!
    I have been at last dealing with IBM PS/2 MCA with my 8595 about twenty years ago and had forgotten everything since .
    Now I start again and bought this 9557.
    I´m lucky to have advice from community members and ardent tools!

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Pertti Helander on Mon Mar 27 06:14:23 2023
    You get what you pay for...

    If we had drilled right down to "THE" answer in the first few days I
    might feel a bit satisfied, but all this "left step, right step, double
    to the rear, with a slight hesitation" makes me aware of limitations to
    being helpful...

    I am NOT satisfied. Should have been running -OR- pronounced as "daid as
    a doornail" a while back.

    Pertti Helander wrote:
    I´m lucky to have advice from community members

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)