Windows 10 and USB. Uh, I'm not sehr klar, but isn't that USB port [DFU]
for bootloading? That is, it is not for normal operation?
FAT? Might work, who knows, but FAT32 might be better for Win 10, no
idea on the drive size.
Configuration - Configure using FAT32 or exFAT-formatted SD or microSD card.
What settings should the switches on top be set to for the adapter to
work just a simple HD in a 9577.
For ZuluSCSI V1.1, the DIP switch settings are as follows:
ON or OFF DEBUG: Enable verbose debug log (saved to zululog.txt)
ON if last device on chain TERM: Enable SCSI termination
OFF BOOT: Enable built-in USB bootloader, this DIP switch MUST remain
off during normal operation.
OFF SW1: Enables/disables Macintosh/Apple specific mode-pages and
device strings, which eases disk initialization when performing fresh
installs on legacy Macintosh computers.
I did look at ZULU SCSI, and sent a few messages to the developer,
regarding use with Micro Channel. It looks like you are the pioneer.
What O/S are you using?
What size of an SD do you have?
I'm not sure if you have a suitable HD image on the SD card. Honestly, I
feel I was the one editing the ZULU SCSI page, it's Kaotic, but without
Wendy O. Williams...
Ryan Alswede wrote:
Zulu SCSI
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)
