1. Forum
  2. Usenet
  3. COMP.SYS.IBM.PS2.HARDWARE

  • Bitsavers 2.3.2 documents Re: Xenix - Warrior Princess (386PC)

    From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:08:14 2022
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious, blue.
    This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:12:24 2022
    2.13.2 SCSI Notes for 386 Microchannel Architecture Machines

    The XENIX 386MC Operating System runs on industry standard
    386 based systems with an Adaptec AHA-1640 SCSI host adapter.

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:10:45 2022
    ESDI, SCSI, ST506 ?

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:27:11 2022
    A.7 Microchannel Architecture 386-based Machines
    The following are supported under XENIX 386MC Operating System:

    mM Personal System/2 Model 55-061
    mM Personal System!2 Model 70-E61
    mM Personal System!2 Model 70-121
    mM Personal System!2 Model 70-A21
    mM Personal System!2 Model 80-041
    mM Personal System!2 Model 80-071
    mM Personal System/2 Model 80-111
    mM Personal System/2 Model 80-311
    Apricot Qi
    Olivetti P500
    Tandy 5000MC

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:16:21 2022
    386PC and 386MC. Nice to know period names...

    For 386MC, only a SCSI controller is supported as a second hard
    disk controller. For 286MC, there is no support for a second hard
    disk controller. For 286AT, only an ST506 controller is supported
    as a second hard disk controller

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:22:07 2022
    286MC 50, 60 and compatibles
    386MC 70, 80 and compatibles; Olivetti P500, Tandy 5000MC, Apricot Qi

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 08:25:15 2022
    A.6 Microchannel Architecture 286-based Machines

    The following are supported by XENIX 286MC Operating System:
    Personal System/2 Model 50-021
    Personal System/2 Model 50-031
    Personal System/2 Model 50-061
    Personal System/2 Model 60-041
    Personal System/2 Model 60-071

    Note that you should not use the XENIX 286MC Operating System
    on the mM Personal System/2 Model 70 or 80. Use only the SCQ
    XENIX 386MC Operating System.

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Louis Ohland@21:1/5 to Louis Ohland on Mon Nov 21 09:20:33 2022
    No MCA ? 2.3.2 supports MCA.

    5.2 XENIX-86XT 53
    5.3 XENIX -6300+ 56
    5.5.1 Machines 61
    5.6 XENIX-386AT 67

    Louis Ohland wrote:
    http://www.bitsavers.org/pdf/sco/system_V_2.x/2.3.2/

    ESDI -AND- SCSI support?

    Louis Ohland wrote:
    So, about 1988 there was a Xenix 386PC for the Model 80. Curious,
    blue. This intrigues me.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)