1. Forum
  2. Usenet
  3. COMP.SYS.IBM.PS2.HARDWARE

  • Micro Channel brackets ("PS/2")

    From Carsten Lyng@21:1/5 to All on Tue May 31 11:32:44 2022
    Do any of you know where to get these brackets ?.

    I have been to bracket.com and used their contact form sometimes now, but I have not heard anything - perhaps they think it is a joke..:-)

    I have seen some on Ebay, but $28.00 for 3 brackets !!


    Regards
    Carsten

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From IBMMuseum@21:1/5 to All on Tue May 31 13:00:08 2022
    Do any of you know where to get these brackets ?.

    I have been to bracket.com and used their contact form sometimes now, but I have not heard anything - perhaps they think it is a joke..:-)

    I have seen some on Ebay, but $28.00 for 3 brackets !!

    There's also an STL to 3D print a plastic version: https://www.thingiverse.com/thing:4854624

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From RickE@21:1/5 to Carsten Lyng on Tue May 31 13:51:59 2022
    On Tuesday, May 31, 2022 at 2:32:45 PM UTC-4, Carsten Lyng wrote:
    I have seen some on Ebay, but $28.00 for 3 brackets !!

    I assume that you're referring to Charles' listing (https://www.ebay.com/itm/334064566027). Short of finding some old PS/2 machine at the thrift store (where you might get a lot of parts for $20 or so), most PS/2 parts have passed into the "rare and
    unusual" realm. Now, if you had asked about 25 years ago, I could have stuck a half-dozen (or more) from my big bag of slot covers and dropped them in the mail for cheap. My big bag held at least 50 PS/2 slot covers, about the same number of 5150 slot
    covers, at least a hundred 5160/5170 slot covers, along with an assortment of various "odd ducks" that I kept when I parted out machines before they went to the scrap bin. But all of that went away in the "great purge" of 2005 when I was supposed to
    part ways with IBM. Instead of leaving, I was "saved" at almost the last minute, but I had already disposed of enough equipment and parts to completely fill one of the big U-haul moving trucks (no joke). I wound up retiring on September 30, 2021, and
    it was one of the happiest days of my life.

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)
  • From Carsten Lyng@21:1/5 to All on Thu Jun 2 10:29:26 2022
    tirsdag den 31. maj 2022 kl. 22.52.00 UTC+2 skrev [email protected]:
    On Tuesday, May 31, 2022 at 2:32:45 PM UTC-4, Carsten Lyng wrote:
    I have seen some on Ebay, but $28.00 for 3 brackets !!
    I assume that you're referring to Charles' listing (https://www.ebay.com/itm/334064566027). Short of finding some old PS/2 machine at the thrift store (where you might get a lot of parts for $20 or so), most PS/2 parts have passed into the "rare and
    unusual" realm. Now, if you had asked about 25 years ago, I could have stuck a half-dozen (or more) from my big bag of slot covers and dropped them in the mail for cheap. My big bag held at least 50 PS/2 slot covers, about the same number of 5150 slot
    covers, at least a hundred 5160/5170 slot covers, along with an assortment of various "odd ducks" that I kept when I parted out machines before they went to the scrap bin. But all of that went away in the "great purge" of 2005 when I was supposed to part
    ways with IBM. Instead of leaving, I was "saved" at almost the last minute, but I had already disposed of enough equipment and parts to completely fill one of the big U-haul moving trucks (no joke). I wound up retiring on September 30, 2021, and it was
    one of the happiest days of my life.


    I should also have saved a lot os PS/2 stuff - including my Soundblaster pro MCV
    I gave my Soundblaster away with my model 80......

    I will try the 3D print - the covers looks fine in IBM Blue

    --- SoupGate-Win32 v1.05
    * Origin: fsxNet Usenet Gateway (21:1/5)