XPost: alt.comp.networking.routers

Which is better in a crowded wifi environment?

Thank you for reading and hopefully answering. :)
--
Paralympics!
Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
/\___/\ Ant(Dude) @ http://aqfl.net & http://antfarm.home.dhs.org.
/ /\ /\ \ Please nuke ANT if replying by e-mail.
| |o o| |
\ _ /
( )

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: alt.comp.networking.routers

On 8/26/21 7:38 PM, Ant wrote:

Which is better in a crowded wifi environment?

Thank you for reading and hopefully answering. :)

All depends. If the auto algorithm is good, and periodically rechecks
the environment, I'd say use it.

If you're using cheap wifi gear, then I'd just resign myself to doing it manually and periodically rechecking.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: alt.comp.networking.routers

Am Thu, 26 Aug 2021 21:38:52 -0500
schrieb [email protected] (Ant):

Which is better in a crowded wifi environment?

Thank you for reading and hopefully answering. :)

I do not recommend using auto select because the Access-Point can only measure the signal at the AP site, but not at the client's side. You need to figure out what channel is most clear at the AP and at the client.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: alt.comp.networking.routers

In alt.comp.networking.routers Marco Moock <[email protected]> wrote:

Am Thu, 26 Aug 2021 21:38:52 -0500
schrieb [email protected] (Ant):

Which is better in a crowded wifi environment?

Thank you for reading and hopefully answering. :)

I do not recommend using auto select because the Access-Point can only measure the signal at the AP site, but not at the client's side. You
need to figure out what channel is most clear at the AP and at the
client.

The problem is that they keep changing. Neighbors' changes so often. I
nopticed if I let my wifi router autochange for each boot up, it can be
on 2, 8, etc. instead of the recommended 1, 6, and 11. :(
--
So many leaks (liquid & digital types), sneezes, itches, pains, videos, spams, issues, software updates, games, sins, etc. Also, BUSY & tired! I hate my old body. :(
Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
/\___/\ Ant(Dude) @ http://aqfl.net & http://antfarm.home.dhs.org.
/ /\ /\ \ Please nuke ANT if replying by e-mail.
| |o o| |
\ _ /
( )

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

XPost: alt.comp.networking.routers

Am Thu, 07 Oct 2021 17:50:08 -0500
schrieb [email protected] (Ant):

on 2, 8, etc. instead of the recommended 1, 6, and 11. :(

You can't do anything against that by changing channels, the band is
overused. The channels also overlap. You can try to should your
apartment with aluminum foil on the walls.

If you clients support it, you can get an access point that support 5 GHz band, this band offers much more channels and is less used.

--
Marco

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)