On Fri, 4 Mar 2016 07:07:59 UTC, Barry Landy <
[email protected]>
wrote:
On Thu, 3 Mar 2016, Barry Landy wrote:
Thanks for that. ISTR Lars did NOT get it working.
MY OS2DASD DANIxxx etc are all from ECS2.2 beta so are well up to date :>(no later changes to those that I am aware of)
I checked for firmware changes. Turns out it is a Samsung box and
thatthere is just one firmware upgrade (from June 2011). Made no
difference!
On Thu, 3 Mar 2016, Pete wrote:
Hi Barry
Barry Landy wrote:
Just a progress report.
Apart from making one coaster, not much!
I looked at ibms506$ and atapi$ which made it seem that Dani software :>:>> had claimed the CD/DVD drive, so...
Reading again the doc files from the DANI installation, I added
/RSJ /A:1 /U:1 /TYPE=W
Shouldn't that be BASEDEV=DANIATAPI.FLT /A:1 /U:1 /RSJ if you are
applying the rsj backdoor for the first unit on adapter 1 ?
to daniatapi.flt
made no difference.....
I notice that
a) I can successfully erase the CD/DVD
b) if I write a small amount (<1Mb) to the CD or DVD I can finalise fine
c) If I write more (a few 100 Mb) it keeps getting errors and only a :>:>> reboot will terminate the process.
I seem to recall similar behaviour years ago here with a CDRW...
I think that was resolved by updating os2dasd.dmd - and possibly some other
related drivers.
It might be worth checking what the buildlevel of drivers involved are ie :>:>os2dasd.dmd, danis506.add, daniatap(i).flt and comparing those with the :>:>bldlevels Lars is using as he seems to have the same burner working.
It may also be worth checking the manufacturers website for a firmware update
- SB00 looks like an initial firmware release.
Regards
Pete
Here is a copy from some of my notes that I keep in the RSJ backup
folder.
Required drivers:
BASEDEV=DANIS506.ADD /VL
BASEDEV=DANIATAPI.FLT
BASEDEV=OS2DASD.DMD
BASEDEV=OS2ASPI.DMD /ALL
DEVICE=C:\os2\ASPIROUT.SYS
DEVICE=c:\os2\ASPINKK.SYS
rem ***RSJ***
DEVICE=D:\CDWFS\RSJSCSI.SYS
IFS=D:\CDWFS\CDWFS.IFS
RUN=D:\CDWFS\CDWFSD.EXE -p "e:/temp" -c20000 -b2048 -t2 -i3 -s0
Note: Add the RSJ backdoor to Daniatapi.flt depending on writer
adapter and unit.
------------------------------------
Notes taken from rsj readme
* If the DANIATAPI.FLT driver is installed, the user can choose if he
wants to install our RSJIDECD.FLT driver, since DANIATAPI provides
a similar functionality for enabling write access to IDE recorders.
Background:
DANIATAPI.FLT also has the ability to emulate SCSI devices. Since
our LOCKCDR.FLT driver does - among other things - the same, it is
possible to not use LOCKCDR.FLT if DANIATAPI is properly installed.
Again, please read the information in the DANIATAPI.DOC file to
find out how.
NOTE:
LOCKCDR.FLT performs dynamic recorder detection during boot time. If
you
do not use it, you have to manually edit the cddrv.inf file.
Note: Copy the Dummy entry in cddrv.inf (use epm with mono font to get
the spacing). Paste it in position for the drive and fill in the
information (keep correct spacing!!!!)
------------------------------------------------------------
End of notes.
I don't know if this will help but it works for my 5.05 retail
version.
ivan
--
--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)