I have a bat file called sysed which sets attrib to edit config.sys then resets. But I accidentally didn't timpe the file name and it reset the whole drive. So I set the whoe drive to unprotect. Is there anything I need to set
to protect in particular?

- = -
Vasos Panagiotopoulos, Columbia'81+, Reagan, Mozart, Pindus
blog: panix.com/~vjp2/ruminatn.htm - = - web: panix.com/~vjp2/vasos.htm
facebook.com/vasjpan2 - linkedin.com/in/vasjpan02 - biostrategist.com
---{Nothing herein constitutes advice. Everything fully disclaimed.}---

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

vjp2.at wrote:

I have a bat file called sysed which sets attrib to edit config.sys then resets. But I accidentally didn't timpe the file name and it reset the
whole drive. So I set the whoe drive to unprotect. Is there anything I
need to set to protect in particular?

Also posted in alt.msdos.batch and alt.msdos.batch.nt.

Please don't multi-post (which is posting the same message to multiple
groups, one at a time). Instead, crosspost (posting the message once, to multiple groups at the same time). You crossposted to the groups I mentioned above; why didn't you include this group as well? (And yes, I know you posted there an hour after here.)

--
- Pleased to meet you.
- I rather doubt that.

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)

vjp2,

But I accidentally didn't timpe the file name and it reset the
whole drive

No, you didn't. Just all files in whatever folder you where in when you ran that ATTRIB command (read: might not have changed any file).

Is there anything I need to set to protect in particular?

Need ? Under DOS ? No. And that includes your config.sys. Doesn't
mean its not a good idea to do it though.

Regards,
Rudy Wieser

--- SoupGate-Win32 v1.05
* Origin: fsxNet Usenet Gateway (21:1/5)