A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle
of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
Doug.
A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle
of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
Doug.
A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle
of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
On 2018-08-11, Doug Laidlaw <[email protected]> wrote:
It is a set of traces on the board which connects for example memory to
the cpu. Ie, it is path along which data flows from one place to the
other.
Too specific. A bus is simply a bunch of connections -A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle
of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
Doug.
On 11/08/18 17:37, William Unruh wrote:
On 2018-08-11, Doug Laidlaw <[email protected]> wrote:Too specific. A bus is simply a bunch of connections -
It is a set of traces on the board which connects for example memory to
the cpu. Ie, it is path along which data flows from one place to the
other.
A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle >>> of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
Doug.
power/address/data - shared by more than one other device.
So CPU might have and address and a data bus to talk to RAM. an IEEE -
488 device would have both on it. A USB bus includes power, and so on.
On 08/11/2018 02:16 PM, The Natural Philosopher wrote:
On 11/08/18 17:37, William Unruh wrote:
On 2018-08-11, Doug Laidlaw <[email protected]> wrote:Too specific. A bus is simply a bunch of connections -
It is a set of traces on the board which connects for example memory to
the cpu. Ie, it is path along which data flows from one place to the
other.
A bus is usually drawn in circuits as one thick line with wires going
into or out of both ends. In my experience, that is done with a bundle >>>> of wires in a "loom," but a bus seems to be different. Is there a
simple explanation of a bus?
Doug.
power/address/data - shared by more than one other device.
So CPU might have and address and a data bus to talk to RAM. an IEEE
- 488 device would have both on it. A USB bus includes power, and so on. >>
The other respondents have provided good answers, but it might be
important to know the difference between a "bus" in computer terminology
and electrical wiring.
In electrical use, a bus is a connection point for a single voltage
level. For example, the ground bus in a circuit breaker panel is a solid metal bar with screw lugs for the individual ground wires coming from
the electrical outlets. Likewise, a bus can be at a high voltage: a 440
volt AC bus to supply voltage to multiple load centers.
I mention this only because getting the two definitions confused could
have seriously bad results.
| Sysop: | Keyop |
|---|---|
| Location: | Huddersfield, West Yorkshire, UK |
| Users: | 741 |
| Nodes: | 16 (2 / 14) |
| Uptime: | 62:05:13 |
| Calls: | 12,446 |
| Calls today: | 1 |
| Files: | 15,192 |
| Messages: | 6,537,481 |