-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<
This message has been _forwarded_! The original message was: <
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<
Area: *WINPOINT*
From: *Tim Schattkowsky(2:240/1120.29)*
To: *All*
Subject: *WinPoint Version 409.0 (A Bugfix Release) is available*
Sent: *18.08.22* *17:23:10*
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<

�������������������������������������ͻ
� � � ���� �
� � � � � WinPoint �
� � � ���� Version 409.0 �
� � � � � �
� � � � Released 2022-08-18 �
�������������������������������������Ķ
� Complete Point Software for Windows �
�������������������������������������Ķ
� Most notable changes since 407.0 �
� �NEW Message tree improvements �
� �NEW Improved Re^X handling �
� �NEW Improved text style detection �
� �FIX "Array index out of Bounds" �
� �FIX Default zone always set to 2 �
� �FIX Some minor bug fixes �
�������������������������������������ͼ

Hello All,

today I myself ran into the infamous "array index out of bounds (-1)" problem and thus could locate and fix the issue. As this was really pressing and also the wrong default zone (always 2 after setup) was bothering people, I shorthanded decided to provide an update rather than doing what I had originally
planned.

I would also like to remind everbody that there is a new and improved message list view since version 407 which is enabled by setting the message pane to "right" and having the list small enough. See the website for a screenshot.

Hope this helps the folks who had issues.

As usual, the new version is available from

http://winpoint.org

Regards,
Tim
-+- WinPoint 409.0
@ Origin: Original WinPoint Origin! (2:240/1120.29) >-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<

End of forwarded message <
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-<

Regards,
Tim
--- WinPoint 410.1
* Origin: Original WinPoint Origin! (2:310/31.6)

Hi, Tim!



�⢥� �� ᮮ�饭�� Tim Schattkowsky (2:310/31.6) � All, ����ᠭ��� 19 ��� 22 � 21:22:

�������������������������������������ͻ
� � � ���� �
� � � � � WinPoint �
� � � ���� Version 409.0 �
� � � � � �
� � � � Released 2022-08-18 � �������������������������������������Ķ
� Complete Point Software for Windows � �������������������������������������Ķ

today I myself ran into the infamous "array index out of bounds (-1)" problem and thus could locate and fix the issue. As this was really pressing and also the wrong default zone (always 2 after setup) was bothering people, I shorthanded decided to provide an update rather
than doing what I had originally planned.

I would also like to remind everbody that there is a new and improved message list view since version 407 which is enabled by setting the message pane to "right" and having the list small enough. See the
website for a screenshot.

Hope this helps the folks who had issues.

As usual, the new version is available from

http://winpoint.org

I try install on Windows 7 x86-32, and after start, packets with netmail and echos download but not open and i no see echos, and sometime this error. Pls look it https://prnt.sc/8SmiVwjiMnxG






WBR, Ruslan Suleimanov.
JabberID: [email protected]
--- GoldED+/FreeBSD/..I LIKE UNIX EVERYDAY..
* Origin: ---/RS/FIDO Druzi 199x fido.odessa.ua/ (2:467/888)

//Hello Ruslan,//

on *20.08.22* at *0:14:01* You wrote in Area *POINTS*
to *Tim Schattkowsky* about *"WinPoint Version 409.0 (A Bugfix Release) is available"*.

I try install on Windows 7 x86-32, and after start, packets with netmail and echos download but not open and i no see echos,

I dont get it. Can you please explain in more detail whan you do, what your expectations are and what actually happens?

and sometime this error. Pls look it https://prnt.sc/8SmiVwjiMnxG

Checked this (thanks for the screenshot) and it seems, that this exception pops up when you change the display encoding from automatic to something else (e.g., russian) while the current area is empty.

I think I have corrected this now. You can try

http://winpoint.org/WP411_1.zip

which should fix this issue.

Regards,
Tim

--- WinPoint 411.1
* Origin: Original WinPoint Origin! (2:310/31.6)

Hello, Tim!



�⢥� �� ᮮ�饭�� Tim Schattkowsky (2:310/31.6) � Ruslan Suleimanov, ����ᠭ��� 20 ��� 22 � 14:16:

//Hello Ruslan,//

on *20.08.22* at *0:14:01* You wrote in Area *POINTS*
to *Tim Schattkowsky* about *"WinPoint Version 409.0 (A Bugfix
Release) is available"*.

I try install on Windows 7 x86-32, and after start, packets with
netmail and echos download but not open and i no see echos,

I dont get it. Can you please explain in more detail whan you do, what your expectations are and what actually happens?

and sometime this error. Pls look it https://prnt.sc/8SmiVwjiMnxG

Checked this (thanks for the screenshot) and it seems, that this
exception pops up when you change the display encoding from automatic
to something else (e.g., russian) while the current area is empty.

I think I have corrected this now. You can try

http://winpoint.org/WP411_1.zip

which should fix this issue.

I install new ver. 411 but some problem, i not see messages in echos, also window not close,
Abort buttom also dont work... https://prnt.sc/s2zPopr-PKgi






WBR, Ruslan Suleimanov.
JabberID: [email protected]
--- GoldED+/FreeBSD/..I LIKE UNIX EVERYDAY..
* Origin: ---/RS/FIDO Druzi 199x fido.odessa.ua/ (2:467/888)

Hello, Tim!



�⢥� �� ᮮ�饭�� Tim Schattkowsky (2:310/31.6) � Ruslan Suleimanov, ����ᠭ��� 20 ��� 22 � 14:16:

//Hello Ruslan,//

on *20.08.22* at *0:14:01* You wrote in Area *POINTS*
to *Tim Schattkowsky* about *"WinPoint Version 409.0 (A Bugfix
Release) is available"*.

I try install on Windows 7 x86-32, and after start, packets with
netmail and echos download but not open and i no see echos,

I dont get it. Can you please explain in more detail whan you do, what your expectations are and what actually happens?

and sometime this error. Pls look it https://prnt.sc/8SmiVwjiMnxG

Checked this (thanks for the screenshot) and it seems, that this
exception pops up when you change the display encoding from automatic
to something else (e.g., russian) while the current area is empty.

I think I have corrected this now. You can try

http://winpoint.org/WP411_1.zip

which should fix this issue.

I tested again, it's works! Thanks ! :)







WBR, Ruslan Suleimanov.
JabberID: [email protected]
--- GoldED+/FreeBSD/..I LIKE UNIX EVERYDAY..
* Origin: ---/RS/FIDO Druzi 199x fido.odessa.ua/ (2:467/888)

//Hello Ruslan,//

on *21.08.22* at *13:51:46* You wrote in Area *POINTS*
to *Tim Schattkowsky* about *"WinPoint Version 409.0 (A Bugfix Release) is available"*.

I install new ver. 411 but some problem, i not see messages in echos, also window not close,
Abort buttom also dont work... https://prnt.sc/s2zPopr-PKgi

Seems the tosser hangs while importing f77c7e00.pkt (see window title). Have not seen this before.

The way the WP tosser works, it first completely reads the messages from all available packets into memory before starting to write any messages to disk. This is for performance reasons. However, if the tosser hangs while reading a packet, it never writes anything to the disk and also cannot respond to the abort button. This seems to happen in your case.

I suspect it is always the same packet causing this problem for you. My first suggestion is to move the problematic packet fil(e) (here f77c7e00.pkt) before selecting Fidonet->Tosser->Import (menuitem) from the inbound directory (Fidonet->Show Inbound Directory in Explorer) to a different location. After that, the import should finish.

*Please keep the problematic file(s) so I can later check it/them to find the problem*.

Also, please let me know if this helped.

Regards,
Tim

--- WinPoint 411.1
* Origin: Original WinPoint Origin! (2:310/31.6)